Průmyslové vzduchové filtry ISO 8573 pro tlak 20 až 2000 mbar, Page 21
.png)
Product sorting
List of products
The filters are used to remove the largest mechanical impurities from compressed air up to 15 µm according to ISO 8573-1 class 7. Connection by flange with DN100 nominal bore....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 µm according to ISO 8573-1 class 7. Connection by flange with DN125 nominal bore....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 µm according to ISO 8573-1 class 7. Connection by flange with DN150 nominal bore....
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN150...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 µm and oil according to ISO 8573-1 class 1. Connection by flange with DN150...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 µm and oil according to ISO 8573-1 class 2. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 µm and oil according to ISO 8573-1 class 2. Connection by flange with DN100...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 µm and oil according to ISO 8573-1 class 2. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 µm and oil according to ISO 8573-1 class 2. Connection by flange with DN150...
The filters are used to remove mechanical impurities from compressed air up to 3 µm according to ISO 8573-1 class 6. Connection by flange with DN80 nominal bore. Designed for...
The filters are used to remove mechanical impurities from compressed air up to 3 µm according to ISO 8573-1 class 6. Connection by flange with DN100 nominal bore. The design...
The filters are used to remove mechanical impurities from compressed air up to 3 µm according to ISO 8573-1 class 6. Connection by flange with DN125 nominal bore. Designed to...
The filters are used to remove mechanical impurities from compressed air up to 3 µm according to ISO 8573-1 class 6. Connection by flange with DN150 nominal bore. Designed for...
Removes the coarsest mechanical dirt up to 15 µm in size according to ISO 8573-1 class 7. Connection with internal pipe threads 1 1/2". The design allows flow rates up to 4700...
Removes mechanical dirt up to 0.1 µm and oil according to ISO 8573-1 class 2. Connection with internal pipe threads 1 1/2". The design allows a flow rate of up to 4700 l/min....
Removes mechanical dirt up to 0.1 µm and oil according to ISO 8573-1 class 2. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....
HPFI pre-filter with G2" connection thread designed for use in highly corrosive environments. Filtration capacity up to 20 µm. Maximum working pressure up to 50 bar, maximum...
HPFM microfilter with G2" connection thread designed for use in highly corrosive environments. Filtration capability down to 0.01 µm. Maximum working pressure up to 50 bar,...
HPFM microfilter with G2" connection thread designed for use in highly corrosive environments. Filtration capability down to 0.01 µm. Maximum working pressure up to 50 bar,...
The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...
Mesh filter PFN25 with G3" connection thread designed for use in highly corrosive environments. Filtration capacity up to 25 µm. Maximum working pressure is 12 bar, maximum flow...
Strainer filter PFN25 with G3" connection thread designed for use in highly corrosive environments. Filtration capacity up to 25 µm. Maximum working pressure is 12 bar, maximum...
PFN5 mesh filter with DN100 flange connection designed for use in highly corrosive environments. Filtration capability down to 5 µm. Maximum working pressure is 10 bar, maximum...
PFN5 mesh filter with DN200 flange connection, designed for use in highly corrosive environments. Filtration capacity up to 5 µm. Maximum working pressure is 10 bar, maximum...
PFN5 mesh filter with DN200 flange connection designed for use in highly corrosive environments. Filtration capacity up to 5 µm. Maximum working pressure is 10 bar, maximum flow...
PFN5 strainer filter with G2" connection thread designed for use in highly corrosive environments. Filtration capacity up to 5 µm. Maximum working pressure up to 16 bar, maximum...
PFN5 strainer filter with G3" connection thread designed for use in highly corrosive environments. Filtration capability down to 5 µm. Maximum working pressure up to 12 bar,...
The CHP1S microfilter with G1 1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 µm....
The CHP1S microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 µm....
The CHP1S microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 µm. Maximum...
The CHP1S microfilter with G2" connection thread is designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 µm....
The CHP1S microfilter with G3/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 µm. Maximum...
CHP1S microfilter with G3/8 connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 µm. Maximum working...
The CHP2S microfilter with G1 1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 µm....