Oil-free ABAC Tech compressor - ATF-1,5-BT motor 1.5 kW, 132 l/min at 10 bar, intake 408 l/min, on a base frame, supply 400/50 V/Hz, 102 dB Lwa / 82 dB at 4 m
Code: ATF-1-5-BT
Product detailed description
ABAC Tech ATF · oil-free · on a frameReady to be installed. ATF-1.5-BT is the same machine as the ATF-1.5-T, only mounted on a steel base frame with a control box. It delivers 132 l/min of oil-free air at 10 bar in duty type S1, that is without breaks to cool down. The frame adds 26 kilos and with them the option to anchor the machine firmly.
What the frame adds
The frame is more than a stand. It holds the airend and the motor in position, so the direct drive cannot go out of line, and it carries the control box where the supply is brought in. The machine can be anchored to the floor or set on anti-vibration mounts that keep the vibration out of the building structure.
Against the bare unit it is 71 kg instead of 45 kg. If you build the installation yourself or extend an existing set-up, take the T version; if you want to bring the machine in and wire it up, you want the frame.
Equipment and details
What ATF-1,5-BT does as delivered
- oil-free single-stage airend with two cylinders in a V, 1,500 rpm
- 1.5 kW motor in duty type S1, that is a 100% duty cycle with no pauses to cool down
- direct drive without belts — the airend sits straight on the motor
- mounted on a steel base frame with a control box; the machine can be anchored to the floor or set on anti-vibration mounts
- electric motor 400/50 V/Hz, three-phase supply, direct starting
- intake 408 l/min, delivery 132 l/min at a working pressure of 10 bar
- nickel-plated aluminium cylinders with heavy finning, Teflon-coated pistons, stainless steel valves
- crankshaft bearings filled with grease at the factory for their whole service life
- no pressure vessel — the air goes into the pipework or into a separate receiver
- weight 71 kg, dimensions 686 × 575 × 671 mm; noise 102 dB Lwa, 82 dB at 4 m
- 2-year warranty
Machine details
Where to go if ATF-1,5-BT does not fit
Without the frame the same machine is ATF-1,5-T. Sixty litres more comes from ATF-2,2-BT. The full overview is in the overview of the whole category, the machines already on a receiver in the version on a receiver.
The delivered figure is the air the machine supplies at a working pressure of 10 bar; the intake is the volume the airend draws in. Noise is given as the sound power level Lwa from the machine plate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek recommends
The frame pays off almost every time you have nowhere to seat the machine. Going without it makes sense only when you already have a structure of your own — otherwise you will be building one yourself.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 408 l/min |
| Air delivery: | 132 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 1.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oil-free |
| Noise: | 102 dB - Lwa, 82 dB - Lwp(4m) |
| Dimensions: | 686 × 575 × 671 mm |
| Weight: | 71 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
| Dimensions: | 686 x 575 x 671 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
