160 kW
Screw and piston compressors with a 160 kW input rating. Input power is a useful first filter but not the whole story — what decides the choice is the free air delivered in litres per minute at your working pressure and how long the machine runs without a break. Continuous demand calls for a screw compressor; intermittent work with idle time is fine on a piston machine. Allow for the receiver, for getting the warm air out of the compressor room, and for an adequately rated electrical supply.
-
Black Wind piston compressors
-
Atmos reciprocating compressors
-
Walter reciprocating compressors
-
Piston compressors ABAC
-
Piston compressors ABAC
-
Expert Zero compressors
-
ABAC reciprocating compressors
-
Quiet compressors Super Silent OS
-
INDUSTRIAL TECH compressors
-
CLR reciprocating compressors
-
Combustion compressors
-
Screw compressors
-
Pressure vessels
-
Compressor accessories
.png)
Product sorting
List of products
The most powerful machine in the range at ten bar — 27,000 l/min. It never drops below 7,600 l/min, so it wants steady demand or a substantial receiver.
The top of the EPM2 range — 33,500 l/min, over thirty-three cubic metres of air a minute from a single enclosure. It needs 30,000 m³/h, twice what the 55 kW asks.
The highest delivery the range will give at normal industrial pressure: 31,000 l/min. Same frame as the 132 kW, only 100 kg heavier.
Two-stage WALTER in its own enclosure for large-scale production with continuous operation. It weighs 4,250 kg, connection DN 100. Noise level 76 dB(A).
A large machine with an inverter in its own cabinet, designed for production with variable demand. The cabinet with a footprint of 2,696 × 1,696 mm is not shared with any other...
Standalone cabinet 2,650 × 1,700 mm for large-scale production with constant air demand. Weight 3,300 kg, connection DN 65, noise level 75 dB(A).