Oil-free compressor ABAC Tech - ATFS-3-2x5CM motor power 3 kW, delivery 245 l/min at 10 bar, intake 430 l/min, tank 10 l, voltage 230/50 V/Hz, 92 dB Lwa / 72 dB at 4 m
Code: ATFS-3-2X5CM
Product detailed description
ABAC Tech ATFS · oil-free · 2×5 lA machine built for towing. Instead of one large tank, the ATFS-3-2x5CM has two five-litre tanks under the support frame, so it stays low and stable. It is powered by two oil-free units, four cylinders in total, delivering 245 l/min at 10 bar. Weight 50 kg.
Why two tanks instead of one
Because of the centre of gravity. Two five-litre tanks fit side by side under the frame, so the mass sits low and the machine doesn't tip over when driving on uneven terrain. A single ten-litre tank would have to sit higher.
The total volume is ten litres, so it's a reserve for short peaks. For continuous draw, the decisive factor is the air delivery of 245 l/min — 28% more than with two-kilowatt machines.
Equipment and details
What the ATFS-3-2x5CM offers from the factory
- two oil-free pump units, four pistons in total, 1,400 rpm
- single-stage compressor — the air is compressed to 10 bar in one step
- PTFE piston rings and a ceramic cylinder surface — no oil can reach the air
- patented connecting rod with a reinforced bearing carrying both pistons
- 3 kW motor in S1 duty, that is a 100% duty cycle without pauses for cooling
- direct drive without belts — no tensioning and no replacement
- 10 l air receiver (two tanks of 5 l each), operating pressure 10 bar
- electric motor 230/50 V/Hz, single-phase supply — an ordinary socket
- intake 430 l/min, delivery 245 l/min at a working pressure of 10 bar
- protective tubular frame, wheels and a folding handle
- weight 50 kg, dimensions 580 × 790 × 570 mm; noise level 92 dB Lwa, at 4 m 72 dB
- 2-year warranty
Machine details
Where to look next if the ATFS-3-2x5CM doesn't fit
The same unit with a hundred-litre tank is ATFS-3-100CM, and for 400 V there is ATFS-3-100CT. Less air but lower weight is offered by the two-kilowatt ATFS-2,2-50CM and ATFS-2,2-3CM. The full overview is in the overview of the entire category.
Delivery is the amount of air the machine supplies at a working pressure of 10 bar; intake is the volume drawn in by the pump units. Noise is stated as the sound power level Lwa from the rating plate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, annex C, noise according to ISO 2151.
Ventilek’s tip
Choose this machine if you will be moving it around a construction site or on an uneven floor. Two low tanks are considerably more stable on rough terrain than one tall one.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 430 l/min |
| Air delivery: | 245 l/min |
| Pressure vessel volume: | 10 L |
| Design of pressure vessel: | Integrated |
| Motor power: | 3.0 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1400 rpm |
| Number of cylinders: | 4 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oil-free |
| Noise: | 92 dB - Lwa, 72 dB - Lwp(4m) |
| Dimensions: | 580 × 790 × 570 mm |
| Weight: | 50 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Mobile |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
