Compressed air hose, Page 13
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

The blue plastic spiral hose 6/4 mm polyurethane, 7.5 m long, including fitted hose ends, is highly resistant to breakage, abrasion and pressure. The small diameter of the...

Green hose with 6/4 mm dimensions and excellent pressure resistance designed for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils,...

Replacement blade for small KTM pliers up to hose size 20 mm. With the pliers, you simply cut the pipe so that it can be easily plugged into the socket system.

Hose clamp SW1 - 27mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Suction hose FoxiBase PUR SL-SE0,4 with a diameter of 127 mm made of abrasion-resistant polyester-polyurethane foil 0,4 mm thick with a steel wire spiral. Transparent body with...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1500 mm with straight and...

Hose clamp SW1 - 21mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

PW4 43mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Hose clamp SW1 - 18mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Hose clamp PW1 85 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...

FoxiPro PUR L suction hose with a diameter of 60 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

FBW deformation clamp with a range of 10.7 mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...

Clear tubing with 4/2 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range 25/40 mm. According to SAE standard with house and tightening screw and hexagon...

EGW deformation hose coupling with a range of 26.5-30.0 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Strength hose clamp SW1 - 23mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1000 mm with straight and...

Deformation hose clamp EWS4 range 13,8 to 16,0 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Clear hose with dimensions 22/18 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Deformation hose coupling EWD1 with a range of 18 to 21 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/2" in length 2500 mm and straight ends.

Hose made of PU Elastollan C-98 clear, 10/8 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...

Hose PA12 blue, 8/6 mm, manufactured according to DIN 73378 / 74324. Polyamide LongLife excellent dimensional stability at higher temperatures. Operating temperature -40/+100...

Hard nylon tubing in black 4/2 mm with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water,...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 30-45 mm. Manufactured according to DIN 3016. With house and tightening...

DW hose clamps with perforated band in material finish W2 with band width 8,5 mm and range 25/40 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel strip and...

Flat hoses made of 100% synthetic high-strength polyester yarn with compact vulcanized rubberized special polymers in 38 mm with a working pressure of 20 bar. Special flat...

PLE water and compressed air hoses with a diameter of 34/25 mm. Black tube and casing - oil and abrasion resistant with 1 textile braid.

Vacuum hose with inner diameter 51 mm and working temperature -5/+60°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...

Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range of 20-32 mm. According to SAE standard with house and tightening screw and...