Air compressors, Page 13

A large 12-bar vertical air receiver holding six cubic metres, for a central reserve of air or gas, even outdoors with frost down to −20 °C. It comes in painted and galvanised...

A large 16-bar vertical air receiver for compressor stations with a higher pressure and for large gas reserves at sites with frost down to −20 °C. It comes in painted and...

A large 12-bar vertical air receiver for the central reserve of a large production plant or several compressor stations, even outdoors with frost down to −20 °C. It comes in...

A large 8-bar vertical air receiver for lower-pressure networks and large gas reserves, outdoors or in unheated halls at temperatures down to −20 °C. It comes in painted and...

SCR-250 WG is an oil-free screw compressor with a 250 kW motor, water-cooled and running at fixed speed. It is supplied at 7, 8 or 10 bar — at seven bar it delivers 2,700 Nm³/h...

Ninety litres for the quietest pump in the range: A29B0 with 1.5 kW on 230 V, 255 l/min, 10 bar, 95 dB Lwa and 75 dB at 4 m. Oil-free, filter-regulator, aftercooler, 52 kg on...

A three-phase ninety with a 1.5 kW motor: the oil-free A29B0 pump draws in 255 l/min, 10 bar, 95 dB Lwa and 75 dB at 4 m; 63 kg on castors, filter-regulator and aftercooler....

Two hundred litres without a 400 V supply: oil-free A29B0 pump with 2.2 kW on 230 V, 320 l/min, 10 bar, 85 kg. Filter-regulator with a DN 7.2 coupling, ball valve, 96 dB Lwa and...

SCR-132 GV is an oil-free screw compressor with a 132 kW motor, air-cooled and fitted with a variable-speed drive. It is supplied at 7, 8 or 10 bar — at seven bar it delivers...

The largest horizontal stainless steel pressure vessel, 1000 l at 11 bar, in AISI304 or AISI316L. Pickled and passivated, manufactured to the Pressure Equipment Directive (PED).

A horizontal stainless steel pressure vessel, 500 l at 11 bar, in AISI304 or AISI316L. Pickled and passivated, it stands on two saddle feet.

A vertical high-pressure vessel, 1000 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. It fits into the space of a standard 1000-litre...

A vertical high-pressure vessel, 1000 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. A large volume for pipework with a pressure of up...

A vertical high-pressure vessel, 1500 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Wider and lower than the 1000-litre vessel.

A vertical high-pressure vessel, 1500 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Wider and lower than the 1000-litre vessel.

A vertical high-pressure vessel, 2000 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. The slim design takes up less floor space.

A vertical high-pressure vessel, 2000 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Wider and lower than the 32-bar vessel of the same...

A vertical high-pressure vessel, 3000 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. For large high-pressure distribution systems.

A vertical high-pressure vessel, 3000 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. A large air reserve for pressures up to 40 bar.

A vertical high-pressure vessel, 4000 l at 32 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Large side connections for a high flow rate.

A vertical high-pressure vessel, 4000 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Lower than the 3000 l vessel, with large side...

A vertical high-pressure vessel, 500 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised. Large connections in both ends and on the sides.

The largest 32-bar vertical high-pressure vessel: 5000 l for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised.

The largest vertical high-pressure vessel, 5000 l at 42 bar, for compressed air, nitrogen and oxygen, painted in RAL 5015 or galvanised.

A vertical stainless steel pressure vessel, 1000 l at 11 bar, in AISI304 or AISI316L. Large connections for the main pipework, pickled and passivated.

A vertical stainless steel pressure vessel, 1500 l at 11 bar, AISI304 or AISI316L. Wider and lower than the thousand-litre vessel, pickled and passivated inside and out.

A vertical stainless steel pressure vessel, 2000 l at 11 bar, in AISI304 or AISI316L steel, for large clean-air distribution systems. Pickled and passivated.

The largest vertical stainless steel pressure vessel, 3000 l at 11 bar, in AISI304 or AISI316L. Pickled and passivated, manufactured to the Pressure Equipment Directive (PED).

A vertical stainless steel pressure vessel, 500 l at 11 bar, in AISI304 or AISI316L steel. Pickled and passivated, with no coating, manufactured to the Pressure Equipment...

A vertical air receiver for the main air reserve downstream of a screw compressor. It takes up little floor space and, with three versions, suits dry, damp and food-processing...

Biggest vertical machine of the range: the cast-iron B60 pump with a 5.5 kW motor puts 827 l/min at 1,400 rpm into 270 l at 11 bar, 102 dB Lwa and 82 dB at 4 m. For a tyre shop...