Compressed air hose, Page 25
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers
List of products
The inner length is 960 mm and the calculated length is 990 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...
The inner length is 1 010 mm and the calculated length is 1 040 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 030 mm and the calculated length is 1 060 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 040 mm and the calculated length is 1 070 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Fixed fitting with R3/8" male tapered thread for 9 x 13 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...
Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 120-140 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...
SW4 115mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Swivel fitting with male tapered thread R1/2" for 11 x 16 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...
Serrated V-belt with a calculated length of 900 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Swivel fitting with G3/8" female pipe thread for 8 x 12 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...
Serrated V-belt with a calculated length of 1 262 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 287 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 320 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 337 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 340 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 347 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 387 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 400 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 462 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 487 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 500 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 9 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
SW4 140mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Hose endless belt with a width of 14 mm and a length of 25 m. Also included are 50 locks for custom use of individual lengths. Supplied in stainless steel. Designed for the...
For hose type PU 8 × 11 with a length of 5 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length adjustment. Total...
Quick coupling swivel with protective spring for 4 x 6 mm hose in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
Designed for TPU hose type 10 × 14 with a length of 12 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length...
Serrated V-belt with a calculated length of 1 412 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 437 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 450 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 537 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
The inner length is 1 320 mm and the calculated length is 1 350 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
PW1 47 mm strength hose clamp with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...