Pressure gauges for compressed air pressure measurement, Page 9
-
Manometers plastic cheap plastic design
-
Glycerine GS manometers with glycerine damping
-
MRS robust gauges robust design
-
MK low pressure gauges measurement in millibars
-
Stainless steel manometers for aggressive media
-
Man. stainless with glycerine robust stainless with glycerine
-
Manometers for gases for welding technology
-
Panel gauges with caliper or flange
-
MSF precision gauges 160 mm gauge accuracy 0.6%
-
Manometers MM miniature indicator 23 mm
-
Digital gauges side and rear versions
-
Gauge accessories for installation and operation
best-selling products

Plastic manometer with 63 mm diameter gauge with side connection via M12*1.5 metric thread for pressure measurement with a range of 0 to 25 bar. Designed for pressure...

The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.

The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.

The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.

Sealing ring made of aluminium for thread M20 × 1.5; G 1/2".

glycerine manometer with a range of 0/100 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure...

The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.

Stainless steel manometer with 100 mm indicator with pressure measurement range 0/6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...

Panel gauge with front flange, 50 mm indicator with pressure measurement range 0/10 bar with 2.5% deviation. Side connection 1/4". Body made of steel, measuring member and...

Rear mount with 90° angle for MAKP digital manometers.

The MAKP-1V-18 digital pressure gauge has a range of -1 to 0 bar with 1/4" pipe thread rear connection.

Panel mount adapter for MAKP digital pressure gauge.

Adapter for panel mounting with display cover for MAKP digital manometers

Rear mount for MAKP digital gauges.

Panel mounted clamp-on gauges with 63 mm diameter, 0 to 1.6 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine panels,...

Panel mounted clamp-on gauges with 63 mm diameter, 0 to 16 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine panels,...

The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.

The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is stainless steel 1.4571.

Panel gauge with front flange, 63 mm indicator with pressure measurement range 0/16 bar with 2.5% deviation. Side connection 1/4". Body made of steel, measuring member and...

Panel gauge with front flange, 63 mm indicator with pressure measurement range 0/400 bar with 2.5% deviation. Side connection 1/4". Body made of steel, measuring member and...

The working pressure is 400 bar. Connection is G 1/2". The valve body is made of steel.

The MAKP-1V-18 digital pressure gauge has a range of -1 to 0 bar with rear connection via 1/8" pipe thread.

The MAKP-1V-18 digital pressure gauge has a range of 0 to 10 bar with 1/4" pipe thread rear connection.

Precision manometer with 160 mm gauge and pressure measurement range 0/1.6 bar with a minimum deviation of 0.6%. Side connection 1/2". Suitable for demanding for accurate...

Manometer for Argon technical gas with 63 mm pointer and pressure measurement range 0/30 bar with 2.5% deviation. Side connection 1/4". Suitable technical gases are intended...

Manometer for low pressures in millibars with a range of 0 - 250 mbar. Indicator version 63 mm with 1/4" thread side connection. Designed for measuring low pressures of gases...

The condensing loop has M20×1.5 outer and M20×1.5 output nuts. The body of the loop is stainless steel 1.4571.

The working pressure is 25 bar. Connection is G 1/2". The tap body is made of stainless steel 1.4571.

Robust manometer with 100 mm diameter steel body with 1/2" rear connection and measuring range 0/25 bar with 1% deviation. Suitable for mechanically demanding applications for...

Panel gauge with front flange, glycerine, 100 mm indicator with pressure measurement range 0/1.6 bar with 1.0% deviation. Side connection 1/2". Stainless steel body and front...

Panel gauge with front flange, glycerine, 100 mm indicator with pressure measurement range 0/1000 bar with 1.0% deviation. Side connection 1/2". Stainless steel body and front...

Panel gauge with front flange, glycerine, 100 mm indicator with pressure measurement range 0/600 bar with 1.0% deviation. Side connection 1/2". Stainless steel body and front...

The working pressure is 400 bar. Connection is G 1/2". The valve body is made of stainless steel 1.4571.

The working pressure is 400 bar. Connection is M20 × 1.5. The valve body is made of steel.

Test pressure gauge valve. The working pressure is 250 bar. Connection is G 1/2". The valve body is made of brass.

The working pressure is 630 bar. Connection is M20 × 1.5. The valve body is made of steel.

Test pressure gauge valve. The working pressure is 630 bar. Connection is M20 × 1.5. The valve body is made of stainless steel 1.4571.

The working pressure is 250 bar. Connection is M20 × 1.5. The valve body is made of brass.

Stainless steel gauge with 100 mm indicator with pressure measurement range 0/10 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...

Panel gauge with front flange, glycerine, 63 mm pointer with pressure measurement range 0/1.6 bar with 1.6% deviation. Side connection 1/4". Stainless steel body and front...