BH profiles and accessories, Page 11
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Groove connector for direct connection of BH 20-6 series profiles.
Groove connector for direct connection of BH 30-8 and IM 40-8 series profiles.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Swivel castor with a 60 mm diameter for mounting with a 60x60 flange, equipped with a brake.
Coupling for creating a pivoting joint between BH 40-10 series profiles with a 40x40 section.
Coupling for creating a pivoting joint between profiles with a 45x45 section, with the possibility of locking using a lever.
Coupling for creating a pivoting joint between 45x90 section profiles with the possibility of locking by tightening the Allen screw.
M18x0.75 threaded magnet for removable door installation.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Two-part base for mounting on profiles with 45x90, 45x135 and 45x180 sections.
Two-part base for mounting on profiles with sections 80x80, 80x120 and 80x160.
Two-part base for mounting on profiles with sections 90x90 and 90x180.
Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Joining plate for perpendicular connection of profiles with an edge width of 40 or 45 mm.
Aluminium hinge with dimensions 50x50, for profiles 30/30, 32/32.
Floor angle bracket for mounting on profiles with a width of 45 mm.
Square washer 16x16 with D=8.5 mm hole.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
Plastic cap for angle bracket 40x38.5 in black.
Plastic hinge made of polyamide with dimensions 50x70, for 40/40 profiles.
M8x50 zinc-plated steel cylindrical head screw
Block for fixing removable panels to all profiles with an 8 mm wide groove. Left-hand version.
Block for fixing removable panels to all profiles with an 8 mm wide groove. Right-hand version.
Aluminium profile with a 30x50 section for creating fencing.
Aluminium profile with a 50x50 section for creating fencing.
Drill bit with a diameter of D=7 mm for creating holes for M5 threaded inserts.
Flange for attaching bases and castors to 50x50 profiles with M20 thread.
Pipe for creating a handle, diameter D=32 mm, made of blue lacquered aluminium.
Base with a diameter of 100 mm and an M20 connection thread. Base load capacity 2200 kg.