.png)
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
_(1).jpg)
.png)
.jpeg)
.png)
Pressure gauges for compressed air pressure measurement, Page 9
-
Manometers plastic cheap plastic design
-
Glycerine GS manometers with glycerine damping
-
MRS robust gauges robust design
-
MK low pressure gauges measurement in millibars
-
Stainless steel manometers for aggressive media
-
Man. stainless with glycerine robust stainless with glycerine
-
Manometers for gases for welding technology
-
Panel gauges with caliper or flange
-
MSF precision gauges 160 mm gauge accuracy 0.6%
-
Manometers MM miniature indicator 23 mm
-
Digital gauges side and rear versions
-
Gauge accessories for installation and operation
best-selling products
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is stainless steel 1.4571.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The condensing loop has an M20×1.5 outer input and an M20×1.5 nut output. The body of the loop is made of steel.
glycerine manometer with 0/16 bar range. Indicator diameter 100 mm with side connection M20 x 1,5. Glycerine filling makes it easier to read the measured pressure for pressure...
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
glycerine manometer with a range of 0/100 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure...
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
Stainless steel manometer with 100 mm indicator with pressure measurement range 0/6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...
Nut in steel with M12 × 1.5 thread.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The working pressure is 25 bar. Connection is G 1/2". The body of the tap is made of brass.
Rear mount for MAKP digital gauges.
Rear mount with 90° angle for MAKP digital manometers.
Panel mount adapter for MAKP digital pressure gauge.
Panel gauge with front flange, glycerine, 100 mm indicator with pressure measurement range 0/400 bar with 1.0% deviation. Side connection 1/2". Stainless steel body and front...
The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
Pressure gauge for technical gas Oxygen with 63 mm pointer and pressure measurement range 0/400 bar with 2.5% deviation. Side connection 1/4". Suitable technical gases are...
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The condensing loop has M20×1.5 outer and M20×1.5 output nuts. The body of the loop is stainless steel 1.4571.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of steel.
Nut in stainless steel 1.4571 with thread G 1/2".
Nut in stainless steel 1.4571 with thread M20 × 1.5.
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range 0/1 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media...
The working pressure is 250 bar. Connection is M20 × 1.5. The valve body is made of brass.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of stainless steel 1.4571.
Test pressure gauge valve. The working pressure is 250 bar. Connection is G 1/2". The valve body is made of brass.
Test pressure gauge valve. The working pressure is 630 bar. Connection is M20 × 1.5. The valve body is made of stainless steel 1.4571.
Panel mounted clamp-on gauges with 63 mm diameter, 0 to 1.6 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine panels,...
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is stainless steel 1.4571.
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range 0/0.6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range 0/1.6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range 0/2.5 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range 0/4 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media...
Stainless steel glycerine manometer with 63 mm pointer with pressure measurement range -1/0 bar with 1.6% deviation. Side connection 1/4". Suitable for demanding aggressive...
Stainless steel glycerine manometer with 160 mm pointer and pressure measurement range -1/0.6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
Stainless steel glycerine manometer with 160 mm pointer with pressure measurement range -1/1.5 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range -1/0 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive...
Glycerine stainless steel manometer with 160 mm pointer and pressure measurement range 0/6 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media...
Stainless steel manometer with 160 mm gauge with pressure measurement range -1/0 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...
.svg?676e60b7)
