High-pressure ABAC Tech compressor - ATH-15/20-BTX motor 15 kW, 1,080 l/min at 20 bar, intake 1,716 l/min, no vessel, supply 400/50 V/Hz, 106 dB Lwa / 86 dB at 4 m
Code: ATH-15/20-BTX
Related products
Product detailed description
ABAC Tech ATH · 20 bar · 1,080 l/minThe top of the twenty-bar range. ATH-15/20-BTX delivers 1,080 l/min at a full 20 bar from an intake of 1,716 l/min. It is a two-stage unit on a steel support frame, without a tank, with an S1 motor for a 100% duty cycle and star-delta start. Weight 189 kg.
When to reach for the most powerful machine
When the technology draws high pressure continuously and in large volumes. Compared to the eleven-kilowatt machine, this is 174 l/min more at the same noise level and only 4 kg more weight — the difference is mainly in the motor and power input, not in the machine size.
The same applies here as for the rest of the range: no tank. A certified air receiver for twenty bar, piping and fittings must be prepared in advance. The S1 motor can run continuously, so the average consumption per shift is calculated, not the peak.
Equipment and details
What the ATH-15/20-BTX offers from the factory
- two-stage oil-lubricated unit with two V-shaped cylinders, 1,500 rpm
- 15 kW motor in S1 mode, i.e. 100% duty cycle without pauses for cooling
- direct drive without belts — the unit sits directly on the motor
- mounted on a steel support frame without an air receiver — air goes to the distribution network or to your own tank
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 1,716 l/min, output 1,080 l/min at an operating pressure of 20 bar
- intercooler between the low-pressure and high-pressure cylinder, stainless steel valves
- crankshaft bearings factory-filled with grease for the entire service life
- weight 189 kg, dimensions 1,118 × 820 × 840 mm; noise level 106 dB Lwa, at 4 m 86 dB
- 2-year warranty
Machine details
Where to go next if the ATH-15/20-BTX isn't the right fit
The nearest weaker machine is the ATH-11/20-BTX, and a ready-made set with a tank is the ATH-7.5/20-270FTX. The full overview is in the overview of the entire category, and five bar lower in the 15 bar range.
Delivery is the amount of air the machine delivers at an operating pressure of 20 bar; intake is the volume drawn in by the low-pressure cylinder. Noise level is given as the sound power level Lwa from the nameplate and as sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise level according to ISO 2151.
A word of advice
Fifteen kilowatts, 1,716 liters of intake air per minute, and 106 dB. This isn't a machine for a workshop — it belongs in a plant room with heat dissipation and piping rated for twenty bar.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 20 bar |
| Suction power: | 1 716 l/min |
| Displacement: | 1 080 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 15 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 2 – two-stage compressor |
| Lubrication: | Oleic |
| Noise: | 106 dB - Lwa, 86 dB - Lwp(4m) |
| Dimensions: | 1 118 × 820 × 840 mm |
| Weight: | 189 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
