High-pressure ABAC Tech compressor - ATH-7,5/20-270FTX motor 7.5 kW, 546 l/min at 20 bar, intake 780 l/min, 270 l receiver, supply 400/50 V/Hz, 101 dB Lwa / 81 dB at 4 m
Code: ATH-7-5/20-270FTX
Related products
Product detailed description
ABAC Tech ATH · 20 bar · 270 lThe largest ready-made assembly in this category. ATH-7,5/20-270FTX is a two-stage unit mounted on a horizontal air receiver of 270 l with an air delivery of 546 l/min at 20 bar. The certified tank is part of the assembly and forms the base, the S1 motor is allowed to run continuously, and the start-up is via star-delta. Weight 223 kg.
When the largest assembly makes sense
When the technology draws high pressure continuously and not in bursts. The motor in S1 mode is allowed to run without pauses, the two-hundred-seventy-litre tank evens out short peaks, and 546 l/min at twenty bar is the most you'll get in this category on a ready-made assembly.
However, the installation needs to be prepared for: 223 kg, length 1,915 mm, a three-phase supply with fusing for star-delta start-up, and a ventilated plant room. In return, you get a machine that doesn't need cooling breaks.
Equipment and details
What the ATH-7,5/20-270FTX comes with from the factory
- two-stage oil-lubricated unit with two V-shaped cylinders, 1,500 rpm
- 7.5 kW motor in S1 mode, i.e. 100% duty cycle without cooling breaks
- direct drive without belts — the unit sits directly on the motor
- horizontal air receiver, 270 l, also serves as the machine's base
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 780 l/min, air delivery 546 l/min at an operating pressure of 20 bar
- intercooler between the low-pressure and high-pressure cylinder, stainless steel valves
- crankshaft bearings factory-filled with grease for the entire service life
- weight 223 kg, dimensions 1,915 × 606 × 1,162 mm; noise level 101 dB Lwa, at 4 m 81 dB
- 2-year warranty
Machine details
Where to go next if the ATH-7,5/20-270FTX isn't the right fit
Without a tank, the same machine is the ATH-7,5/20-BTX, the smaller assembly is the ATH-5,5/20-270FTX. More air is only delivered by the frame-mounted machines ATH-11/20-BTX and ATH-15/20-BTX. The full overview is in the overview of the entire category, five bar lower in the 15 bar range.
Delivery is the amount of air the machine delivers at an operating pressure of 20 bar; intake is the volume drawn in by the low-pressure cylinder. Noise level is given as the sound power level Lwa from the nameplate and as sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise level according to ISO 2151.
Ventilek advises
This is already a plant room, not a workshop: 223 kg, two or more meters of space with clearance for cooling and piping rated for twenty bar. Have this ready before the machine arrives.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 20 bar |
| Suction power: | 780 l/min |
| Air delivery: | 546 l/min |
| Pressure vessel volume: | 270 L |
| Design of pressure vessel: | Lying down |
| Motor power: | 7.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 2 – two-stage compressor |
| Lubrication: | Oleic |
| Noise: | 101 dB - Low, 81 dB - Lwp(4m) |
| Dimensions: | 1915 × 606 × 1162 mm |
| Weight: | 223 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
