Screw and piston compressors with 7,5 kW input
Compressors with a power input of 7,5 kW are precise, professional and above all reliable machines. Depending on the air tank (pressure vessel) capacity they can supply compressed air for many applications – in workshops, car services, industrial premises. A set with a refrigeration dryer can also be supplied.
-
Black Wind reciprocating compressors; cheap and simple design
-
Atmos reciprocating compressors; PERFECT cast iron series
-
Walter reciprocating compressors; GK cast iron robust machines
-
ABAC reciprocating compressors; Line series
-
ABAC piston compressors; Extensive and Expert series
-
ABAC reciprocating compressors; Pro Zero oil-free series
-
ABAC reciprocating compressors; Pro Silent series
-
Super Silent compressors; super quiet oil-free design
-
INDUSTRIAL TECH compressors; industrial for continuous operation
-
CLR reciprocating compressors; oil-free dental design
-
Combustion compressors; petrol and diesel engines
-
Screw compressors; 3 brands, 2.2–280 kW
-
Pressure vessels; self-contained and equipped
-
Compressor accessories; oil-drain-valves
.png)
Product sorting
List of products
Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...
The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...
Compressor, 500-litre receiver and refrigerant dryer in one unit. 996 l/min at 10 bar, 7.5 kW, 65 dB(A). Dry air and a reserve for peak demand without assembling a set.
Separate compressor units B79. Designed for professional use. Oil-lubricated design, two-stage compressor with two pistons. Delivery includes impeller for V-belt connection. 2...
Diesel engine reciprocating compressor with an output pressure of 10 bar designed for use in construction, agriculture and mobile services. Mobile version independent of the...
Diesel engine reciprocating compressor with an output pressure of 10 bar designed for use in construction, agriculture and mobile services. Mobile version independent of the...
The compressor unit with a motor and an output pressure of 10 bar is designed for continuous operation in the industry. Oil-free design with a motor input of 7.5 kW.
Piston compressor with an output pressure of 15 bar designed for continuous operation in industry. Oil-lubricated design with a motor input of 7.5 kW and a pressure vessel with...
Compressor on a base frame with an output pressure of 15 bar, designed for continuous operation in industry. Oil-lubricated design with a motor input power of 7.5 kW.
Piston compressor with an output pressure of 20 bar designed for continuous operation in industry. Oil-lubricated design with a motor input of 7.5 kW and a pressure vessel with...
Compressor on a base frame with an output pressure of 20 bar designed for continuous operation in industry. Oil-lubricated design with a motor input power of 7.5 kW.
Base frame compressor with an output pressure of 30 bar designed for continuous operation in industrial applications. Oil-lubricated design with a motor input power of 7.5 kW.
The compressor unit with a motor and an output pressure of 10 bar is designed for continuous operation in the industry. Oil-lubricated design with a motor input power of 7.5 kW.
Compressor on a base frame with an output pressure of 10 bar designed for continuous operation in industry. Oil-lubricated design with a motor input power of 7.5 kW.
Industrial four-cylinder 7.5 kW at 13 bar with a displacement of 960 l/min and a 500 l tank. Low-speed operation at 725 min⁻¹ for long duty cycles.
Highest pressure and lowest speed in the entire range: 15 bar, displacement 900 l/min, four-cylinder 7.5 kW at 688 min⁻¹ and a 500 l tank. For testing laboratories and...
The highest displacement in the WALTER range: a four-cylinder cast iron unit 7.5 kW with a displacement of 1 100 l/min at 10 bar and a 500 l air receiver. The speed of 768 rpm...
The most powerful unit of the WALTER range: four-cylinder 7.5 kW on a base frame without a pressure vessel, displacement 1 100 l/min at 768 rpm. For central distribution with...
Separate compressor units B70. Designed for professional use. Oil-lubricated design, two-stage compressor with two pistons. Delivery includes impeller for V-belt connection. 2...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary version with a motor...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary design with a motor...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary version with a motor...
The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).
The smallest machine in the top equipment level. To the 4-in-1 package it adds a micro-filter, an activated-carbon filter, zero-loss drains and a separator — the air exceeds...
The most complete package in the range — 848 l/min, a 200 l receiver and a built-in refrigerant dryer with a +5 °C dew point. Dry air for the spray booth and for plasma from a...
E.65 in Standard version, without air receiver (on feet) · 7.5 kW · pressure 10 bar · capacity 1.0 m³/min. Higher power class with a 7.5 kW motor and B100...
E.65 K Comfort version (soundproof steel enclosure), without air receiver · 7.5 kW · pressure 10 bar · capacity 1.0 m³/min. Higher power class with a 7.5 kW...
E.65 K Vertical in Comfort version, without air receiver (on feet), vertical arrangement · 7.5 kW · pressure 10 bar · capacity 1.0 m³/min. Higher power...