High-pressure ABAC Tech compressor - ATH-7,5/15-BTX motor 7.5 kW, 702 l/min at 15 bar, intake 1,002 l/min, no vessel, supply 400/50 V/Hz, 101 dB Lwa / 81 dB at 4 m
Code: ATH-7-5/15-BTX
Related products
Product detailed description
ABAC Tech ATH · 15 bar · 702 l/minThe most air the ATH line can deliver at fifteen bar. ATH-7,5/15-BTX delivers 702 l/min at 15 bar and draws in 1,002 l/min. A two-stage unit on a steel support frame with star-delta starting and an S1 motor for continuous operation. It weighs 121 kg and has no air receiver of its own.
What operation it's for
Seven and a half kilowatts at fifteen bar is a machine for technology with continuous draw-off — pressure testing, filling, special molding. The difference compared to the 5.5 kW version is 702 instead of 552 l/min, i.e. 27% more air for the same footprint and 20 kg more weight.
The frame-mounted version assumes you already have an air supply at fifteen bar. If not, the ready-made assembly on a 270 l air receiver is simpler — the certified tank is included in the delivery.
Equipment and details
What the ATH-7,5/15-BTX comes with from the factory
- two-stage oil-lubricated unit with two V-shaped cylinders, 1,500 rpm
- 7.5 kW motor in S1 mode, i.e. 100% duty cycle without cooling breaks
- direct drive without belts — the unit sits directly on the motor
- mounted on a steel support frame without an air receiver — air goes to the distribution network or to your own tank
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 1,002 l/min, delivery 702 l/min at an operating pressure of 15 bar
- intercooler between the low-pressure and high-pressure cylinder, stainless steel valves
- crankshaft bearings factory-filled with grease for the entire service life
- weight 121 kg, dimensions 1,073 × 693 × 761 mm; noise level 101 dB Lwa, 81 dB at 4 m
- 2-year warranty
Machine details
Where to go next, if the ATH-7,5/15-BTX isn't the right fit
With an air receiver, it's the same machine as ATH-7,5/15-270FTX, the smaller one is ATH-5,5/15-BTX. The complete overview is in the overview of the whole category, higher pressure in the 20 bar line.
Delivery is the amount of air the machine delivers at a working pressure of 15 bar; intake is the volume drawn in by the low-pressure cylinder. Noise is given as the sound power level Lwa from the nameplate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek's advice
The strongest machine in the line is also the loudest: 101 dB sound power. It has no place whatsoever in a room where people work — and at fifteen bar, expect higher temperature of the compressed air at the outlet as well.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 15 bar |
| Suction power: | 1 002 l/min |
| Air delivery: | 702 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 7.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 2 – two-stage compressor |
| Lubrication: | Oleic |
| Noise: | 101 dB - Low, 81 dB - Lwp(4m) |
| Dimensions: | 1073 × 693 × 761 mm |
| Weight: | 121 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
