High-pressure ABAC Tech compressor - ATH-5,5/15-BTX motor 5.5 kW, 552 l/min at 15 bar, intake 780 l/min, no vessel, supply 400/50 V/Hz, 100 dB Lwa / 80 dB at 4 m
Code: ATH-5-5/15-BTX
Related products
Product detailed description
ABAC Tech ATH · 15 bar · 552 l/minPower for the whole technology. The ATH-5,5/15-BTX delivers 552 l/min at 15 bar and draws in 780 l/min. It is a two-stage unit on a steel support frame with star-delta starting, with an S1 motor for a 100% duty cycle. Without its own tank — it assumes you already have a 15-bar air supply in your operation.
Frame, or complete assembly
This machine on the frame weighs 101 kg. Its twin on the 270-litre tank weighs 211 kg and measures almost two metres — the difference is only whether you handle the air supply yourself, or want to have it right under the machine.
The frame version makes sense where the main air receiver in the machine room is rated for 15 bar. Connection to a tank rated for ten bar is not possible — the pressure vessel must be certified and inspected for the operating pressure.
Equipment and details
What the ATH-5,5/15-BTX comes with from the factory
- two-stage oil-lubricated unit with two V-shaped cylinders, 1,500 rpm
- 5.5 kW motor in S1 mode, i.e. 100% duty cycle with no pauses for cooling
- direct drive without belts — the unit sits directly on the motor
- mounted on a steel support frame without an air receiver — air goes to the distribution network or to your own tank
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 780 l/min, output 552 l/min at an operating pressure of 15 bar
- intercooler between the low-pressure and high-pressure cylinder, stainless steel valves
- crankshaft bearings factory-filled with grease for the entire service life
- weight 101 kg, dimensions 1,073 × 693 × 761 mm; noise level 100 dB Lwa, at 4 m 80 dB
- 2-year warranty
Machine details
Where to go next if the ATH-5,5/15-BTX doesn't fit
On an air receiver, the same machine is the ATH-5,5/15-270FTX. The smaller one is the ATH-4/15-BTX, the stronger one is the ATH-7,5/15-BTX. The full overview is in the overview of the whole category.
Delivery is the amount of air the machine delivers at a working pressure of 15 bar; intake is the volume drawn in by the low-pressure cylinder. Noise is given as the sound power level Lwa from the nameplate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek advises
Five and a half kilowatts at fifteen bar is a machine that deserves a proper machine room — because of the noise and because of the heat that two-stage compression generates. Plan for ventilation of the space, not just floor space.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 15 bar |
| Suction power: | 780 l/min |
| Air delivery: | 552 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 5.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 2 – two-stage compressor |
| Lubrication: | Oleic |
| Noise: | 100 dB - Lwa, 80 dB - Lwp(4m) |
| Dimensions: | 1073 × 693 × 761 mm |
| Weight: | 101 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
