High-pressure ABAC Tech compressor - ATH-2,2/15-90FT motor 2.2 kW, 234 l/min at 15 bar, intake 318 l/min, 90 l receiver, supply 400/50 V/Hz, 99 dB Lwa / 79 dB at 4 m
Code: ATH-2-2/15-90FT
Related products
Product detailed description
ABAC Tech ATH · 15 bar · 90 lFifteen bar with reserve capacity. The ATH-2,2/15-90FT is the same two-stage unit as the frame-mounted version, just mounted directly on a 90-litre horizontal air receiver. It delivers 234 l/min at 15 bar, the S1 motor can run a full shift without a break and starts directly online. The tank is certified for the operating pressure and also serves as the machine's base.
Why a unit with a tank
At fifteen bar, the tank is trickier than at ten bar: a standard 10 bar air receiver cannot be connected here. This assembly solves the problem for you — the tank, the unit, and the pressure switch arrive connected and dimensioned for the operating pressure. Ninety litres is a reserve for short demand peaks, not for prolonged continuous blowing.
Compared to the frame-mounted version, the machine weighs 97 kg instead of 73 and takes up more space. If you already own an air receiver certified for fifteen bar, the frame-mounted version will suffice.
Equipment and details
What the ATH-2,2/15-90FT offers from the factory
- two-stage oil-lubricated unit with two V-shaped cylinders, 1,500 rpm
- 2.2 kW motor in S1 mode, i.e. 100% duty cycle without pauses for cooling
- direct drive without belts — the unit sits directly on the motor
- 90 l horizontal air receiver also serves as the base of the machine
- 400/50 V/Hz electric motor, three-phase supply, direct start
- intake 318 l/min, free air delivery 234 l/min at an operating pressure of 15 bar
- intercooler between the low-pressure and high-pressure cylinder, stainless steel valves
- crankshaft bearings factory-filled with grease for the entire service life
- weight 97 kg, dimensions 1,000 × 533 × 980 mm; noise level 99 dB Lwa, at 4 m 79 dB
- 2-year warranty
Machine details
Where to go next if the ATH-2,2/15-90FT isn't the right fit
Without the tank, the same machine is the ATH-2,2/15-BT, larger assemblies are the ATH-5,5/15-270FTX and ATH-7,5/15-270FTX. The full overview is available in the category overview.
Delivery is the amount of air the machine delivers at a working pressure of 15 bar; intake is the volume drawn in by the low-pressure cylinder. Noise is given as the sound power level Lwa from the nameplate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek advises
Ninety litres at fifteen bar hold a decent reserve of energy — more than it might seem, because the air in the tank is compressed to one and a half times the usual pressure. Do not forget regular condensate draining and air receiver inspections.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 15 bar |
| Suction power: | 318 l/min |
| Air delivery: | 234 l/min |
| Pressure vessel volume: | 90 L |
| Design of pressure vessel: | Lying down |
| Motor power: | 2.2 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 2 – two-stage compressor |
| Lubrication: | Oleic |
| Noise: | 99 dB - Lwa, 79 dB - Lwp(4m) |
| Dimensions: | 1 000 × 533 × 980 mm |
| Weight: | 97 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
