Industrial ABAC Tech compressor - ATL-5,5-BTX motor 5.5 kW, 576 l/min at 10 bar, intake 1,146 l/min, on a base frame, supply 400/50 V/Hz, 100 dB Lwa / 80 dB at 4 m
Code: ATL-5-5-BTX
Related products
Product detailed description
ABAC Tech ATL · S1 100 % · 576 l/minIndustrial class. ATL-5.5-BTX delivers 576 l/min at 10 bar and is the first machine in the range with the larger frame — 1,073 × 693 × 721 mm and 101 kg. It runs up through star-delta and the S1 motor takes a whole shift without a pause.
Why this machine is markedly bigger
The difference from the four-kilowatt machine is not only in output: the whole assembly has grown from 686 to 1,073 mm in length and from 92 to 101 kg. A bigger pump needs a bigger cooling area and a sturdier frame so that it is not working at its limit on continuous duty.
The air delivered rises from 402 to 576 l/min at ten bar. That is already enough to feed several draw-off points at once — provided you have the pipework or a separate receiver for it, because the machine has no tank of its own.
Equipment and details
What ATL-5,5-BTX does as delivered
- single-stage oil-lubricated pump with two cylinders in a V, 1,500 rpm
- 5.5 kW motor in duty type S1, that is a 100% duty cycle with no pauses to cool down
- direct drive without belts — the pump sits straight on the motor
- set on a steel base frame with a terminal box; the machine can be bolted to the floor or set on anti-vibration mounts
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 1,146 l/min, 576 l/min delivered at a working pressure of 10 bar
- aluminium-silicon cylinders with heavy finning, stainless valves, bearings greased for the whole service life
- no pressure vessel — the air goes into the pipework or into a separate receiver
- weight 101 kg, dimensions 1,073 × 693 × 721 mm; noise 100 dB Lwa, at 4 m 80 dB
- two-year warranty
Machine details
Where to go if ATL-5,5-BTX does not fit
Smaller and nine kilos lighter is ATL-4-BTX; the most air comes from ATL-7,5-BTX. The whole overview is in the overview of the whole category, the machines already on a receiver in the version on a receiver.
The delivered figure is the air the machine supplies at a working pressure of 10 bar; the intake is the volume the pump draws in. Noise is given as the sound power level Lwa from the machine plate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek recommends
From five and a half kilowatts upwards, reckon on the machine needing a corner of its own. A hundred kilos does not get moved, and 100 dB of sound power does not belong in a room where people work.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 1,146 l/min |
| Air delivery: | 576 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 5.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 100 dB - Lwa, 80 dB - Lwp(4m) |
| Weight: | 101 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
| Dimensions: | 1 073 x 693 x 721 mm |
Detailed description of the ABAC TECH range
Introducing the ABAC TECH industrial range
Performance of the ABAC TECH series
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
