Screw and piston compressors with 5,5 kW input

The three-cylinder class with the largest reserve, for operations that draw air in heavy bursts: sandblasting smaller parts, filling, blowing down a line. The 740 l/min air...

The most powerful machine in the SPINN Mini range: 780 l/min at 10 bar, which is 2.65 times the output of the entry model. It handles a spray gun and several workstations at...

The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry...

Complete set for smaller operations with intermittent demand and dried air: compressor, tank, dryer and filters all in one unit. Housing 1,970 × 720 × 1,700 mm, weight 395 kg,...

A complete setup for a workshop that wants dried and filtered air directly from the machine and doesn't want to assemble individual components. It weighs 382 kg, the connection...

The most powerful vertical WALTER: a three-cylinder unit delivering 740 l/min on a footprint of 65 × 70 cm. For a workshop with two workstations that has no room for a two-metre...

A three-cylinder single-stage ATMOS Perfect 5,5/2x90 compressor with a cast-iron LB 75 pump unit, on two 90 l air receivers. It delivers 750 l/min of compressed air at 10 bar...

For two people working at the same time and continuously: a grinder plus a spray gun, or two tyre-service bays. The three-cylinder unit at 902 rpm delivers 740 l/min, and the...

A three-cylinder unit for two workstations running at the same time, without a tank: for a compressor room or an existing air receiver with a valid inspection. The W layout at...

A complete assembly on a horizontal two-hundred-and-seventy-litre vessel. A 5.5 kW two-stage airend with star-delta starting, ready to be placed and connected.

Five and a half kilowatts on a base frame, with star-delta starting. For plants that have their own certified fifteen-bar vessel.

Five and a half kilowatts mounted on a horizontal two-hundred-and-seventy-litre receiver. A complete assembly for continuous duty that only has to be placed and connected.

Five and a half kilowatts on a base frame with star-delta starting. The mid-range machine for plants that have their own twenty-bar pressure vessel.

Five and a half kilowatts on a base frame. Of all the machines in the category it gives back the largest share of the air it draws in — two thirds.

The most powerful machine in the category with soft motor starting. The same tank as the four-kilowatt one, but 174 litres of air more. It weighs 189 kg.

A five-and-a-half kilowatt machine on a base frame with soft starting. A sturdier build than the smaller ratings — 101 kg and a longer frame. For a shop with a steady draw from...

Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary design with a motor...

Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary design with a motor...

Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary version with a motor...

Five and a half kilowatts on a steel base frame, with star-delta starting. The largest machine of the range that comes ready mounted on a frame.