Screw compressor SPN-5,5/10DX-270 input power 5.5 kW, delivery rate 696 l/min, pressure 10 bar, air receiver 270 l, voltage 400/50 V/Hz YD + dryer

Code: SPN-5-5/10DX-270
Tip Low noise
Not rated Rating details
€8 230,88 / pcs €6 802,38 excl. VAT Measure price:
Stock (1 pcs)
Delivery to:
20.11.2026
Delivery options
The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry air right at the outlet.

Detailed information

Free shipping
Free shipping
For purchases over 5,000 CZK
We guarantee
We guarantee
Extended warranty and service
Discount voucher
Discount voucher
For every purchase
Return of goods within 14 days
Return of goods within 14 days
Completely at our expense

Product detailed description

ABAC SPN-5,5/10DX-270 screw compressor with a 270 l receiver, three-quarter viewQuietest in the range — 64 dB(A)

The way into the complete SPINN Maxi sets. The compressor, a 270-litre receiver and a refrigerant dryer sit in one frame, so there is no assembling a set from parts. It delivers 696 l/min at 10 bar and at 64 dB(A) it is the quietest machine in the whole range.

For smaller workshops and paint shops where spraying or sensitive tools are involved and no separate plant room is to be built. The machine can stand right in the working area.

696 l/minair delivered at 10 bar
5.5 kWmotor power
64 dB(A)noise
270 lreceiver volume

What sets the SPN-5,5/10DX-270 apart

Three devices, one frame

Compressor, receiver and dryer arrive together and take up 1,543 × 720 mm. Assembling them separately would mean more space and more joints where air can leak.

Dry air straight away

The refrigerant dryer with eco-friendly R513A takes the water out right at the outlet. No moisture then goes into the pipework to ruin tools or paintwork.

Condensate without daily attention

The central automatic condensate drain does away with daily manual draining and reliably takes the water out of the system.

64 dB(A)

The quietest machine in the series. The difference compared to the fifteen model is seven decibels, which is noticeable at first listen.

Two hundred and seventy litres is the smallest tank in the lineup. It's sufficient for short draw-offs. However, when grinding or spraying for a longer period at a stretch, the five-hundred-litre version is the safer choice — the differences are discussed in Efficient Operation of Screw Compressors.
Cross-section of the ABAC SPN-5,5/10DX-270 screw compressor — showing the screw block, cooler and oil distribution

What's inside

Under the canopy sits the C55 screw block, driven from the motor by V-belts. Beside it the cooler, the oil circuit and the separator, a refrigerant dryer using R513A and a central automatic condensate drain.

Control is handled by the Infologic2 unit with a display. The oil sight glass is on the outside of the canopy and the panels come off, so checking the oil or changing filters does not take half a day.

Photo of the model

ABAC SPN-5,5/10DX-270 screw compressor — front view
ABAC SPN-5,5/10DX-270 screw compressor — right side view
ABAC SPN-5,5/10DX-270 screw compressor — overall view of the assembly

Dimensions and specifications

  • Output 696 l/min at 10 bar
  • Dimensions 1 543 × 720 × 1 337 mm, weight 242 kg
  • Outlet G 3/4", power supply 400/50 V/Hz, three-phase
  • With a refrigerant dryer and a 270-litre receiver
  • Extending the warranty to five years carries the ABAC code ABA-5R and costs 5 % of the machine price — with us you get it as a gift with the product.
  • Ten years against rust-through of the 270-litre pressure vessel

Where the SPN-5,5/10DX-270 sits in the range

Technical specifications of the ABAC SPINN Maxi range
ModelAir deliveryPower inputAir receiverDryerNoise levelWeight
SPN-7,5/10X996 l/min7.5 kW——65 dB(A)170 kg
SPN-11/101,416 l/min11 kW——69 dB(A)185 kg
SPN-15/101,680 l/min15 kW——71 dB(A)200 kg
SPN-5,5/10DX-270 — this model696 l/min5.5 kW270 lyes64 dB(A)242 kg
SPN-7,5/10DX-500996 l/min7.5 kW500 lyes65 dB(A)270 kg
SPN-11/10DX-5001,416 l/min11 kW500 lyes69 dB(A)285 kg
SPN-15/10DX-5001,680 l/min15 kW500 lyes71 dB(A)300 kg

FAD output measured to ISO 1217, annex C. Noise measured to ISO 2151:2004 using ISO 9614/2. Working pressure is 10 bar on every model, power supply 400/50 V/Hz, three-phase.

A larger air supply and 300 l/min more is offered by the SPN-7,5/10DX-500. If you don't need a dryer or a tank because they're already part of the distribution system, the standalone unit SPN-7,5/10X will suffice. And below 696 l/min, the range continues with the ABAC SPINN Mini series.

The dryer inside is not a reward. It is the reason the paint does not crater.

Water condenses out of the air far down the pipework, a kilometre from the compressor. When the machine takes it out at the outlet, there is nothing left to spoil the gun.

Additional parameters

Category: Air compressors
Warranty: 5 years
Compressor type: Screw compressor
Pressure: 10 bars
Air delivery: 696 l/min
Pressure vessel volume: 270 L
Connecting: 3/4"
Motor power: 5.5 kW
Mains voltage: 400/50 V/Hz
Lubrication: Oleic
Noise: 64 dB - Lwp(4m)
Dimensions: 1 543 × 720 × 1 337 mm
Weight: 242 kg
Engine: Electric
Soundproofed: Yes
Drive: V-belts
Air dryer: Yes
Retrieved from: Professional
Development: Stationary
Inverter: No
In stock: External warehouse

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

By submitting your review you agree to the privacy policy

ABAC is an Italian compressor brand, founded in 1981 and part of the Atlas Copco Group since 2007. We carry machines from a carry-case compressor you lift with one hand, through workshop piston compressors, to industrial and screw machines for an entire hall.

Besides standard oil-lubricated machines, ABAC also makes oil-free compressors for paint shops and surgeries, soundproofed machines in an acoustic cabinet and engine-driven compressors for building sites. They are complemented by ABAC DRY refrigerated dryers, oils and service kits.

ABAC compressors: SUITCASE carry case, V36 twin-cylinder, Pro Line A39B and CROSS screw compressorManuals in the AirTube app
1981brand founded in Italy
since 2007part of the Atlas Copco Group
0.55–22 kWfrom portable unit to screw station
up to 30 barABAC Tech high-pressure machines

ABAC compressor ranges

ABAC V36 piston compressor on a 50 l receiver

ABAC Line — for a standard socket

For tradespeople and smaller workshops. Direct-drive piston machines, from a one-hand carry case to a twin-cylinder unit on wheels.

  • 1.1–2.2 kW, 230 V
  • intake 160–355 l/min, 8–10 bar
  • for work with breaks between cycles
View the Line range
ABAC Pro Line B60 piston compressor on a 270 l receiver

ABAC Pro Line — V-belt drive

Daily work in workshops and service. Oil-lubricated single- and two-stage machines, on wheels, on feet or as a tandem.

  • 1.5–7.5 kW, intake 178–2,420 l/min
  • 10, 11 or 15 bar
  • 50–900 l receiver
View the Pro Line range
ABAC Silent soundproofed compressor in a cabinet on a 500 l receiver

ABAC Silent — soundproofed

When the compressor stands next to you. Pump, motor and belt are enclosed in an acoustic cabinet; some machines also house a dryer.

  • 81–89 dB Lwa in the cabinet
  • on 270 and 500 l receivers or tankless
  • 1.5–7.5 kW
View the Silent range
ABAC Expert Zero oil-free compressor on a 270 l receiver

ABAC Expert Zero — oil-free

For paint shops, upholstery and food. An oil-free pump with Teflon-coated cylinders, driven by V-belts.

  • intake 255–486 l/min, 10 bar
  • 50–270 l receiver
  • 230 and 400 V
View Expert Zero
ABAC Tech ATH high-pressure compressor on a 270 l receiver

ABAC Tech — industrial

Runs without cooling breaks. Cast-iron pump and an S1 motor rated for a 100% duty cycle, oil-lubricated or oil-free.

  • 1.5–15 kW
  • 10 to 30 bar
  • on a base frame or a receiver
View ABAC Tech
ABAC CROSS screw compressor on a receiver

ABAC SPINN and CROSS — screw

When air flows all shift long. Six ranges from a workshop unit to a station for a whole hall, stand-alone or with receiver and dryer.

  • 2.2–22 kW, delivery 272–3,090 l/min
  • 10 bar, 57–71 dB(A)
  • SPV with a variable speed drive
View screw compressors
ABAC Engine Air petrol compressor on wheels

Engine Air — petrol and diesel

Air where there is no socket. Piston compressors with a combustion engine: portable in a frame, on wheels or stationary.

  • intake 275–1,038 l/min
  • 10–14 bar
  • Honda and Kohler engines
View Engine Air
ABAC Clean Air dental compressor on a vertical tank

Clean Air — dental

For dental surgeries and laboratories. Oil-free 8 bar compressors with an adsorption dryer or in an acoustic cabinet.

  • for 1 to 5 dental chairs
  • dew point −40 °C with dryer
  • 64 dB(A) at 1 m in the cabinet
View Clean Air

Not sure which range to pick? The Compressors page has a selection calculator and a table of how much air each tool uses.

Choose a compressor

ABAC ranges side by side

Range, use, design, intake, pressure and power supply
RangeFor whomDesignIntakePressurePower
ABAC Linetradespeople, smaller workshopspiston, direct drive160–355 l/min8–10 bar230 V
ABAC Pro Linedaily work in workshops and servicepiston, V-belts178–2,420 l/min10–15 bar230 / 400 V
ABAC Silentmachine next to the workstationpiston, soundproofed255–1,070 l/min8–11 bar230 / 400 V
ABAC Expert Zerooil-free airoil-free piston, V-belts255–486 l/min10 bar230 / 400 V
ABAC Super Silent OSquiet work in occupied roomsoil-free piston, direct drive140–230 l/min8–9 bar230 V
ABAC Techindustry, non-stop operationpiston, S1 motor204–1,716 l/min10–30 bar230 / 400 V
ABAC SPINN and CROSScontinuous air demandscrewdelivery 272–3,090 l/min10 bar400 V, one model 230 V
Engine Airsites without electricitypiston, petrol or diesel275–1,038 l/min10–14 barcombustion engine
Clean Air CLRdental surgeries and laboratoriesoil-free piston240–480 l/min8 bar230 V

Intake is the air the pump draws in; less of it reaches the tool. For screw compressors the manufacturer states the delivery.

How to choose an ABAC compressor

1. Work out the air demand

Add up the consumption of all tools running at the same time and add a reserve. Compare it with the delivery, not the intake: on piston machines the delivery is roughly a quarter lower.

2. Match the running time

For work with breaks, a Line or Pro Line piston machine is enough. If air has to flow all shift long, choose ABAC Tech with an S1 motor or a screw compressor.

3. Check power and space

Smaller machines run from a 230 V socket, more powerful ones need a three-phase 400 V supply. In the code of an electric piston machine, M stands for a 230 V motor and T for 400 V.

4. Maintain regularly

On oil-lubricated machines, check the level in the sight glass and drain the condensate after work. ABAC piston pumps have service kits: the basic LK1 for yearly and the advanced PK1 for two-year maintenance.

Frequently asked questions

Who makes ABAC compressors?
ABAC is an Italian compressor brand founded in 1981. It is based in Robassomero near Turin and has been part of the Atlas Copco Group since 2007. Its production quality is backed by ISO 9001 certification.
Piston or screw compressor?
It depends on running time. A piston machine fills the receiver and rests, so it suits intermittent work in a workshop. A screw compressor is built for continuous operation and pays off where air is used all shift long. For its screw machines ABAC states roughly 30% higher energy efficiency and about 20 dB(A) less noise.
Which ABAC compressors are oil-free?
The Expert Zero range, the quiet Super Silent OS, the ATF and ATFS versions of ABAC Tech, the Clean Air dental compressors and the SUITCASE carry case compress air without oil. They suit paint shops, food production, laboratories and surgeries.
How quiet is an ABAC compressor?
The rating plate shows the sound power level Lwa; 4 m from the machine you will measure about 20 dB less. Silent machines in a cabinet have 81 to 89 dB Lwa, the quiet Super Silent OS 63 to 65 dB at 4 m and the screw compressors 57 to 71 dB(A).
Do I need a dryer with my compressor?
Compressed air always contains water that condenses in the pipework. For painting or a long pipe network you need a dryer: the ABAC DRY refrigerated dryer brings the air to a pressure dew point of +4 °C and comes in 17 sizes from 266 to 18,000 l/min. Some Pro Line, Silent and SPINN machines have a dryer fitted at the factory.
Where do I find the manual and which oil should I use?
Manuals and service videos open via the QR code on the machine in the AirTube app. ABAC piston machines use Altair and ABAC Pro oils, screw machines Rotair oils, including the food-grade Rotair Foodgrade. The manual tells you which oil your machine needs.

Manuals and service videos for ABAC compressors are in the AirTube app via the QR code on the machine. Technical data are manufacturer figures. ABAC is a brand of the Atlas Copco Group.