Screw compressor SPN-7.5/10X
Code: SPN-7-5/10X
Related products
Product detailed description
Smallest footprint in the rangeThe entry model of the SPINN Maxi range, for workshops and plants where the receiver already stands and only the source of air is being replaced. It delivers 996 litres a minute at 10 bar and takes up 850 × 720 mm of floor — the same as the 11 and the 15 kW, because all three share the same canopy.
Reach for it when you already have a receiver and are only replacing a worn-out compressor. Or when you are building a plant room where the vessel stands separately and the machine should be as small as possible.
What sets the SPN-7,5/10X apart
A canopy that does not change
Seven and a half, eleven and fifteen kilowatts all fit the same 850 × 720 × 980 mm box. When you later add output, you do not have to change the space in the workshop.
V-belt drive
The motor drives the screw block through V-belts. That is how the maker covers three outputs on one canopy; the belts do get tensioned and replaced over time.
C55 block
A latest-generation screw block with high compression efficiency. That is where the difference in consumption against a piston machine comes from.
Infologic2 controller
Electronic control with a display comes as standard. It tracks running hours, service intervals and fault states.
What is inside
Under the canopy sits the C55 screw block, driven from the motor by V-belts. Beside it the cooler, the oil circuit and the separator.
Control is handled by the Infologic2 unit with a display. The oil sight glass is on the outside of the canopy and the panels come off, so checking the oil or changing filters does not take half a day.
Photographs of the model
Dimensions and specifications
- Output 996 l/min at 10 bar
- Dimensions 850 × 720 × 980 mm, weight 170 kg
- Outlet G 3/4", power supply 400/50 V/Hz, three-phase
- Without a dryer and without a receiver
- Extending the warranty to five years carries the ABAC code ABA-5R and costs 5 % of the machine price — with us you get it as a gift with the product.
Where the SPN-7,5/10X sits in the range
| Technical specifications of the ABAC SPINN Maxi range | ||||||
|---|---|---|---|---|---|---|
| Model | Output | Motor power | Receiver | Dryer | Noise | Weight |
| SPN-7,5/10X — this model | 996 l/min | 7,5 kW | — | — | 65 dB(A) | 170 kg |
| SPN-11/10 | 1,416 l/min | 11 kW | — | — | 69 dB(A) | 185 kg |
| SPN-15/10 | 1,680 l/min | 15 kW | — | — | 71 dB(A) | 200 kg |
| SPN-5,5/10DX-270 | 696 l/min | 5,5 kW | 270 l | yes | 64 dB(A) | 242 kg |
| SPN-7,5/10DX-500 | 996 l/min | 7,5 kW | 500 l | yes | 65 dB(A) | 270 kg |
| SPN-11/10DX-500 | 1,416 l/min | 11 kW | 500 l | yes | 69 dB(A) | 285 kg |
| SPN-15/10DX-500 | 1,680 l/min | 15 kW | 500 l | yes | 71 dB(A) | 300 kg |
FAD output measured to ISO 1217, annex C. Noise measured to ISO 2151:2004 using ISO 9614/2. Working pressure is 10 bar on every model, power supply 400/50 V/Hz, three-phase.
You can buy the receiver for this machine separately, or take a set with the vessel and the dryer in one frame straight away — the closest on output is the SPN-7,5/10DX-500. The SPN-11/10 gives 420 l/min more from the same footprint. And if 996 l/min is too much, the ABAC SPINN Mini range starts as low as 294 l/min.
The difference between the three standalone models is inside — on the outside they all measure 850 × 720 mm. Anyone planning to grow saves themselves a move of the plant room.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Displacement: | 996 l/min |
| Pressure vessel volume: | It isn't |
| Connecting: | 3/4" |
| Motor power: | 7.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 65 dB - Lwp(4m) |
| Dimensions: | 850 × 720 × 980 mm |
| Weight: | 170 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
| Frequency converter: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
