Industrial ABAC Tech compressor - ATL-7,5-TX motor 7.5 kW, 786 l/min at 10 bar, intake 1,560 l/min, bare unit, supply 400/50 V/Hz, 101 dB Lwa / 81 dB at 4 m
Code: ATL-7-5-TX
Related products
Product detailed description
ABAC Tech ATL · S1 100 % · top of the rangeThe most air the range can do, without a frame. ATL-7.5-TX delivers 786 l/min at 10 bar and is a bare unit: pump and motor on a common plate, 102 kg, measuring 860 × 591 × 625 mm. It runs up through star-delta and the S1 motor takes continuous duty.
Why the strongest machine without a frame
At seven and a half kilowatts the bare version makes sense where the machine is going into an existing assembly — for instance when a worn-out pump is being replaced on a frame that stays. You save 18 kilograms and the cost of a frame you would not have used.
The output is identical to the framed version: 786 l/min at ten bar, an intake of 1,560 l/min and 1,500 rpm. The noise level of 101 dB Lwa is the highest in the range — this machine belongs in a machine room.
Equipment and details
What ATL-7,5-TX does as delivered
- single-stage oil-lubricated pump with two cylinders in a V, 1,500 rpm
- 7.5 kW motor in duty type S1, that is a 100% duty cycle with no pauses to cool down
- direct drive without belts — the pump sits straight on the motor
- bare unit with the motor on a common plate, no frame — for your own mounting or an existing assembly
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 1,560 l/min, 786 l/min delivered at a working pressure of 10 bar
- aluminium-silicon cylinders with heavy finning, stainless valves, bearings greased for the whole service life
- no pressure vessel — the air goes into the pipework or into a separate receiver
- weight 102 kg, dimensions 860 × 591 × 625 mm; noise 101 dB Lwa, at 4 m 81 dB
- two-year warranty
Machine details
Where to go if ATL-7,5-TX does not fit
On a base frame it is the same machine, ATL-7,5-BTX. Two hundred litres less come from ATL-5,5-BTX. The whole overview is in the overview of the whole category, the machines already on a receiver in the version on a receiver.
The delivered figure is the air the machine supplies at a working pressure of 10 bar; the intake is the volume the pump draws in. Noise is given as the sound power level Lwa from the machine plate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek recommends
A seven-and-a-half kilowatt bare unit is not a machine you stand on the floor and plug in. Reckon on solving the frame or the anchoring yourself — otherwise take the BT version.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 1,560 l/min |
| Air delivery: | 786 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 7.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 101 dB - Low, 81 dB - Lwp(4m) |
| Weight: | 102 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
| Dimensions: | 860 x 591 x 625 mm |
Detailed description of the ABAC TECH range
Introducing the ABAC TECH industrial range
Performance of the ABAC TECH series
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
