High-pressure ABAC Tech compressor - ATH-7,5/30-BTX motor 7.5 kW, 510 l/min at 30 bar, intake 780 l/min, on a base frame, supply 400/50 V/Hz, 101 dB Lwa / 81 dB at 4 m
Code: ATH-7-5/30-BTX
Related products
Product detailed description
ABAC Tech ATH · 30 bar · 510 l/minATH-7,5/30-BTX delivers 510 l/min at the full 30 bar from an intake of 780 l/min. It is a two-stage unit on a steel support frame with a control cabinet and star-delta start, weighing 121 kg.
Why this machine is a turning point
Because the next step up adds almost nothing. The eleven-kilowatt machine delivers 558 l/min — compared to this seven-and-a-half, that's nine percent more for a fifty percent higher power input. These are the manufacturer's figures, not our estimate. The real jump comes only at fifteen kilowatts, where the delivery is double.
So if the seven-and-a-half just barely isn't enough for you, it usually doesn't pay off to go for the eleven — either stick with this machine and adjust your consumption, or go straight to the @ATH-15/30-BTX@.
Equipment and details
What the ATH-7,5/30-BTX comes with from the factory
- two-stage oil-lubricated unit with two V-shaped cylinders, 1,500 rpm
- 7.5 kW motor in S1 85% duty — an industrial cycle with a short pause roughly every fifty minutes
- direct drive without belts — the unit sits directly on the motor
- mounted on a steel support frame with control panel; air receiver is not included
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 780 l/min, delivery 510 l/min at an operating pressure of 30 bar
- intercooler between the low-pressure and high-pressure cylinder, stainless steel valves
- crankshaft bearings factory-filled with grease for the entire service life
- weight 121 kg, dimensions 1,073 × 693 × 761 mm; noise level 101 dB Lwa, 81 dB at 4 m
- 2-year warranty
Machine Details
Where to go next if ATH-7,5/30-BTX doesn't fit
Smaller is the ATH-5,5/30-BTX, nine percent more is delivered by the ATH-11/30-BTX, and double is the ATH-15/30-BTX. The full overview is in the category overview, ten bar lower is the 20 bar range.
Delivery is the amount of air that the machine supplies at an operating pressure of 30 bar; intake is the volume drawn in by the low-pressure cylinder. Noise level is stated as the sound power level Lwa from the nameplate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, annex C, noise level according to ISO 2151.
Ventilek advises
Here you should pay attention to what you're paying for. Between seven and a half and eleven kilowatts, the difference in air is nine percent, in power input it's half. Do the math.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 30 bar |
| Suction power: | 780 l/min |
| Air delivery: | 510 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 7.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 2 – two-stage compressor |
| Lubrication: | Oleic |
| Noise: | 101 dB - Low, 81 dB - Lwp(4m) |
| Dimensions: | 1073 × 693 × 761 mm |
| Weight: | 121 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
