Industrial ABAC Tech compressor - ATL-7,5-BTX motor 7.5 kW, 786 l/min at 10 bar, intake 1,560 l/min, on a base frame, supply 400/50 V/Hz, 101 dB Lwa / 81 dB at 4 m
Code: ATL-7-5-BTX
Related products
Product detailed description
ABAC Tech ATL · S1 100 % · 786 l/minThe top of the range. ATL-7.5-BTX delivers 786 l/min at 10 bar and stands on the large base frame measuring 1,073 × 693 × 721 mm. At 120 kilograms it is the heaviest machine in the category. It runs up through star-delta and in duty type S1 may run without a break.
When to reach for the strongest machine
Seven and a half kilowatts earns its place where several stations hang on the air at once and the draw does not stop for lunch. Against the five-and-a-half kilowatt machine that is 210 l/min more from the same frame — only the weight grows, from 101 to 120 kg.
Reckon on a supply that will take a seven-and-a-half kilowatt motor together with star-delta, and on a place outside the working area: 101 dB of sound power is the most in the whole category.
Equipment and details
What ATL-7,5-BTX does as delivered
- single-stage oil-lubricated pump with two cylinders in a V, 1,500 rpm
- 7.5 kW motor in duty type S1, that is a 100% duty cycle with no pauses to cool down
- direct drive without belts — the pump sits straight on the motor
- set on a steel base frame with a terminal box; the machine can be bolted to the floor or set on anti-vibration mounts
- electric motor 400/50 V/Hz, three-phase supply, star-delta starting
- intake 1,560 l/min, 786 l/min delivered at a working pressure of 10 bar
- aluminium-silicon cylinders with heavy finning, stainless valves, bearings greased for the whole service life
- no pressure vessel — the air goes into the pipework or into a separate receiver
- weight 120 kg, dimensions 1,073 × 693 × 721 mm; noise 101 dB Lwa, at 4 m 81 dB
- two-year warranty
Machine details
Where to go if ATL-7,5-BTX does not fit
Without the frame it is the same machine, ATL-7,5-TX. Two hundred litres less come from ATL-5,5-BTX. The whole overview is in the overview of the whole category, the machines already on a receiver in the version on a receiver.
The delivered figure is the air the machine supplies at a working pressure of 10 bar; the intake is the volume the pump draws in. Noise is given as the sound power level Lwa from the machine plate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek recommends
This is the most powerful piston machine in the range. If even 786 litres is not enough and you need air truly without interruption, it is time to look at a screw compressor.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 1,560 l/min |
| Air delivery: | 786 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 7.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 101 dB - Low, 81 dB - Lwp(4m) |
| Weight: | 120 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Starting the machine: | Y/D - Star triangle |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
| Dimensions: | 1 073 x 693 x 721 mm |
Detailed description of the ABAC TECH range
Introducing the ABAC TECH industrial range
Performance of the ABAC TECH series
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
