Industrial ABAC Tech compressor - ATL-4-270FT motor 4 kW, 402 l/min at 10 bar, intake 918 l/min, 270 l receiver, supply 400/50 V/Hz, 99 dB Lwa / 79 dB at 4 m
Code: ATL-4-270FT
Related products
Product detailed description
ABAC Tech ATL · S1 100 % · 402 l/minThe usual choice in the category. ATL-4-270FT delivers 402 l/min at 10 bar and stands on a two-hundred-and-seventy-litre horizontal receiver, so it also copes with a draw that comes in bursts. The S1 motor runs continuously and starts directly — no star-delta and no extra demands on the supply.
Why four kilowatts on the big tank
Against the smallest machine in the category that is 402 l/min instead of 210 and a tank three times the size. The combination covers a workstation where quiet spells alternate with bursts — sandblasting, longer blowing off, two tools at once. The motor then cuts in less often, which lengthens its life.
It is also the most powerful machine in the category with direct starting. The five-and-a-half kilowatt one already has star-delta and the protection that goes with it; this one connects to an ordinary three-phase 400 V supply with nothing further to think about.
Equipment and details
What ATL-4-270FT does as delivered
- single-stage oil-lubricated pump with two cylinders in a V, 1,500 rpm
- 4 kW motor in duty type S1, that is a 100% duty cycle with no pauses to cool down
- direct drive without belts — the pump sits straight on the motor
- horizontal 270 l pressure vessel forms the base of the machine; condensate drained through a valve
- electric motor 400/50 V/Hz, three-phase supply, direct starting
- intake 918 l/min, 402 l/min delivered at a working pressure of 10 bar
- aluminium-silicon cylinders with heavy finning, stainless valves, bearings greased for the whole service life
- the machine stands on feet with anti-vibration mounts — no bolting down
- weight 150 kg, dimensions 1,629 × 606 × 1,151 mm; noise 99 dB Lwa, at 4 m 79 dB
- two-year warranty
Machine details
Where to go if ATL-4-270FT does not fit
Smaller and shorter is ATL-2,2-90FT; more air comes from ATL-5,5-270FTX. Without a tank the same pump is in the basic version without a tank. The whole overview is in the overview of the whole category.
The delivered figure is the air the machine supplies at a working pressure of 10 bar; the intake is the volume the pump draws in. Noise is given as the sound power level Lwa from the machine plate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek recommends
This machine is the sensible middle of the whole category: enough air, a large reserve and no worries about starting. If you are unsure, take it.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 918 l/min |
| Air delivery: | 402 l/min |
| Pressure vessel volume: | 270 L |
| Design of pressure vessel: | Lying down |
| Motor power: | 4.0 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 99 dB - Lwa, 79 dB - Lwp(4m) |
| Dimensions: | 1 629 × 606 × 1 151 mm |
| Weight: | 150 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
