Screw compressor SPV-5.5/10D-200 input power 5.5 kW, air delivery 780 l/min, pressure 10 bar, air receiver 200 l, voltage 400/50 V/Hz + dryer
Code: SPV-5-5/10D-200
Related products
Product detailed description
The widest regulation rangeThe top of the SPINN SPV range. The 337 to 757 l/min range is the widest of all four models — the machine drops deep in quiet running yet still covers the peak when the whole workshop draws at once. That is paid for in noise: 61 dB(A) is four decibels more than the smaller models.
For operations where demand changes a lot through the day — one workstation in the morning, three in the afternoon. That profile is exactly what the drive is built for.
What sets the SPV-5,5/10D-200 apart
Range 1:2.2, the widest in absolute numbers
From 337 to 757 l/min is 420 litres of span. The wider the band, the bigger the swings in demand the machine covers without idling.
757 l/min at peak
Enough for several pneumatic tools at once, or for the continuous draw of a grinder or a sandblasting gun.
61 dB(A)
Four decibels more than the smaller models in the range. If the machine is to stand among people, allow for it.
Same set, more output
Air receiver 200 l, dryer and dimensions 1,430 × 600 × 1,260 mm remain unchanged. Compared to the four, only 10 kg is added.
What's inside
Under the canopy sits the C43 screw block driven from the motor by V-belts, a refrigerant dryer and a central automatic condensate drain.
Control is handled by the Infologic2 Connect unit with a colour display. It tracks the 2,000 – 4,000 – 6,000 running hours service intervals and allows machine monitoring and precise setting of the outlet pressure.
Machine details
Parameters of SPV-5.5/10D-200
- Regulation range 337 – 757 l/min at 10 bar
- Input power 5.5 kW, noise 61 dB(A)
- A 200-litre receiver with a refrigerant dryer in one frame
- Dimensions 1,430 × 600 × 1,260 mm, weight 210 kg, outlet G 1/2"
- Service intervals 2,000 – 4,000 – 6,000 running hours, tracked by the Infologic2 Connect unit
- Ten years against rust-through of the two-hundred-litre air receiver
Where the SPV-5,5/10D-200 sits in the range
| Technical specifications of the ABAC SPINN SPV range | ||||
|---|---|---|---|---|
| Model | Control range | Power input | Noise level | Weight |
| SPV-2.2/10D-200 | 131 – 293 l/min | 2.2 kW | 57 dB(A) | 190 kg |
| SPV-3/10D-200 | 139 – 360 l/min | 3.0 kW | 57 dB(A) | 195 kg |
| SPV-4/10D-200 | 270 – 503 l/min | 4.0 kW | 58 dB(A) | 200 kg |
| SPV-5,5/10D-200 — this model | 337 – 757 l/min | 5.5 kW | 61 dB(A) | 210 kg |
Every model: pressure 10 bar, 200 l receiver, refrigerant dryer, power supply 400/50 V/Hz, three-phase, outlet G 1/2", dimensions 1,430 × 600 × 1,260 mm. Service intervals 2,000 – 4,000 – 6,000 running hours.
254 l/min weaker and three decibels quieter is the SPV-4/10D-200. Above 5.5 kW the range does not continue — stronger machines start at 696 l/min in the ABAC SPINN Maxi range, though at fixed speed. A variable speed drive is also fitted to the ABAC CROSS range.
The difference between the minimum and maximum for this 5.5 is bigger than the entire output of the 2kW model. That's the whole point of the inverter — one machine covers the workshop both at idle and at peak.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Air delivery: | 757 l/min |
| Pressure vessel volume: | 200 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 1/2" |
| Motor power: | 5.5 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Dimensions: | 1 430 × 600 × 1 260 mm |
| Weight: | 210 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | Yes |
| Minimum displacement: | 337 l/min |
| Maximum displacement: | 757 l/min |
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
