Screw compressor SPV-4/10D-200 power consumption 4.0 kW, displacement 516 l/min, pressure 10 bar, air receiver 200 l, voltage 400/50 V/Hz + dryer
Code: SPV-4/10D-200
Related products
Product detailed description
The most popular in the rangeThe 4 kW is the most common choice in the range. At peak it gives 503 l/min, enough for two or three pneumatic tools at once, and in quiet running it drops to 270 l/min. Against the 3 kW it adds 143 litres for a single decibel more.
For engineering workshops and car services where two or three people work on the line at the same time and demand changes through the day.
What sets the SPV-4/10D-200 apart
143 l/min more for one decibel
Against the 3 kW this is the biggest jump in output in the range, and the noise rises only from 57 to 58 dB(A).
A high regulation minimum
The lower limit of 270 l/min is higher than on the smaller models. This machine is built for an operation where something is always being drawn, not for long idle spells.
Central condensate drain
The condensate leaves automatically; walking round the machine every day is over. On a set with a dryer it matters — more water is produced.
Service after 2,000 hours
Intervals of 2,000 – 4,000 – 6,000 running hours. The Infologic2 Connect unit tracks and reports them itself.
What is inside
Under the canopy sits the C43 screw block driven from the motor by V-belts, a refrigerant dryer and a central automatic condensate drain.
Control is handled by the Infologic2 Connect unit with a colour display. It tracks the 2,000 – 4,000 – 6,000 running hours service intervals and allows machine monitoring and precise setting of the outlet pressure.
Machine details
SPV-4/10D-200 specifications
- Regulation range 270 – 503 l/min at 10 bar
- Motor power 4,0 kW, noise 58 dB(A)
- A 200-litre receiver with a refrigerant dryer in one frame
- Dimensions 1 430 × 600 × 1 260 mm, weight 200 kg, outlet G 1/2"
- Service intervals 2,000 – 4,000 – 6,000 running hours, tracked by the Infologic2 Connect unit
- Ten years against corrosion of the 200-litre pressure vessel
Where the SPV-4/10D-200 sits in the range
| Technical specifications of the ABAC SPINN SPV range | ||||
|---|---|---|---|---|
| Model | Regulation range | Motor power | Noise | Weight |
| SPV-2,2/10D-200 | 131 – 293 l/min | 2,2 kW | 57 dB(A) | 190 kg |
| SPV-3/10D-200 | 139 – 360 l/min | 3,0 kW | 57 dB(A) | 195 kg |
| SPV-4/10D-200 — this model | 270 – 503 l/min | 4,0 kW | 58 dB(A) | 200 kg |
| SPV-5,5/10D-200 | 337 – 757 l/min | 5,5 kW | 61 dB(A) | 210 kg |
Every model: pressure 10 bar, 200 l receiver, refrigerant dryer, power supply 400/50 V/Hz, three-phase, outlet G 1/2", dimensions 1 430 × 600 × 1 260 mm. Service intervals 2,000 – 4,000 – 6,000 running hours.
143 l/min weaker and one decibel quieter is the SPV-3/10D-200. Upwards comes the SPV-5,5/10D-200 with 757 l/min, at the cost of three decibels. Where demand does not fluctuate, the fixed-speed machines of the ABAC SPINN Mini range will do.
Between the 3 and the 4 kW you gain 143 l/min and the noise goes up from 57 to 58 dB. That is a difference nobody in a workshop will notice.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Displacement: | 503 l/min |
| Pressure vessel volume: | 200 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 1/2" |
| Motor power: | 4.0 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Dimensions: | 1 430 × 600 × 1 260 mm |
| Weight: | 200 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Frequency converter: | Yes |
| In stock: | External warehouse |
| Minimum displacement: | 270 l/min |
| Maximum displacement: | 504 l/min |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
