Screw compressor SPM-4/10D-200 power consumption 4.0 kW, air delivery 516 l/min, pressure 10 bar, air receiver 200 l, voltage 400/50 V/Hz + dryer
Code: SPM-4/10D-200
Related products
Product detailed description
For continuous air demandThis is where the range turns a corner. The previous two models handle tools that take air in bursts. The four-kilowatt SPM-4 delivers 516 litres per minute — 76% more than the entry model — and that is already enough for tools with continuous demand.
You pay for that jump with a single decibel: 62 dB(A) instead of 61. The ratio of added air to added noise is the most favourable in the whole range right here.
What sets the SPM-4/10D-200 apart
- 4 kW motor, 516 l/min output at 10 bar — 31.0 m³/h according to ISO 1217
- 76% more air than the entry model, at the cost of a single decibel (62 dB(A))
- the first model in the range that can handle tools with continuous air demand
An operation that grinds, sandblasts or shot blasts — that is, where tools draw air continuously rather than in bursts.
An extra 150 l/min for just one more decibel — that's what stepping up from the SPM-3/10D-200 looks like. Another 264 l/min costs four decibels that are noticeable in the workshop, and these are delivered by the SPM-5,5/10D-200. When the tool doesn't run at full output the whole shift, the ABAC SPINN SPV series reduces the electricity bill.
Equipment shared by the whole SPINN Mini range
C43 screw air end
The latest generation of air end with high compression efficiency, belt driven.
Refrigerant dryer
With a dew point indicator and eco-friendly R513A refrigerant. Removes water from the air.
Air tank 200 l
The air reserve covers peak demand without the motor having to start.
Infologic² unit
A monochrome display with operating settings and machine status indication.
Warranty and service
- 10 years against corrosion of the air receiver
- option to extend the warranty to 5 years (code ABA-5R, 5% of the machine price)
- service intervals of 2,000 – 4,000 – 6,000 running hours
- the machine is intended for craft businesses and workshops that require continuous compressor operation
Continuous demand is not the same as a peak.The receiver covers a short peak but not continuous demand — that has to be met by the air end itself. That is why with grinders we look at l/min, not at receiver volume.
Smaller models assume that you draw air in batches. From this four-kilowatt unit upwards, the machine keeps running even under tools that draw air continuously.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Air delivery: | 516 l/min |
| Pressure vessel volume: | 200 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 3/4" |
| Motor power: | 4.0 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Dimensions: | 1 430 × 600 × 1 260 mm |
| Weight: | 200 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | No |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
