Screw Compressor CRS-4/10-200 Power consumption 4 kW, output 498 l/min, pressure 10 bar, air receiver 200 l, voltage 400/50 V/Hz
Code: CRS-4/10-200
Related products
Product detailed description
A rotary screw compressor with a 200-litre receiverfor workshops building a compressed air system from scratch that want compressor and receiver in one unit. It delivers498 litres of air per minuteat 10 bar — enough for two or three air tools at once.
The variable speed drivematches speed to demand, so the machine never runs flat out or cycles off needlessly. ABAC quotes up to 25 % less energy than piston compressors.
First service after 2,000 hours
What to know before you buy
Continuous duty
Unlike a piston compressor it needs no cool-down breaks — it runs a whole shift.
400 V supply
A three-phase connection is required. Soft start loads your fuses far less than a piston machine.
Service after 2,000 h
The first service is due after two thousand operating hours or one year.
Smooth running
Two rotors compress the air continuously — none of the pulsation a piston machine sends into your piping.
What it looks like in service
The best-selling package in the range. A two-hundred-litre vessel covers longer draws without pressure swings.
At 60 dB(A) the machine stands in the workshop itself — no separate compressor room and no long pipe run, usually the most expensive part of the installation in a small shop.
Who this particular model is for
Impact wrenches, lifts, tyre service.
Nail guns and sanders over longer cycles.
Blow-off, grinders, plasma cutting.
Which CROSS to choose
The usual question is not whether to buy a screw compressor, but which one from the range. Here is this model next to its closest neighbours.
Compared with the closest models | ||||
|---|---|---|---|---|
| Model | Air delivery | Motor power | Air receiver | Dryer |
| CRS-4/10-200 — this model | 498 l/min | 4 kW | 200 l | — |
| CRS-4/10-100 | 498 l/min | 4 kW | 100 l | — |
| CRS-4/10D-200 | 498 l/min | 4 kW | 200 l | yes |
Frequently asked questions about this model
- Will it feed two air tools at once?
- Yes. 498 l/min at 10 bar covers two or three ordinary tools at once. For sandblasting or long spray jobs count on a single draw.
- Do I still need a dryer with it?
- For spray painting and sensitive tools, yes — either the CRS-4/10D-200 with one built in, or a separate unit in the line. For ordinary impact wrenches and inflation you can manage without.
- How often does it need servicing?
- The first service is due only after 2,000 running hours or one year, whichever comes first.
Air delivery measured per ISO 1217 ed. 4 (2009), annex E, at a reference pressure of 9.5 bar; noise per ISO 2151 (2004).
The 200-litre tank is the most popular size in the series, because it covers a longer draw as well. Dry air, though, is not something this model delivers — the refrigerant dryer only comes with the CRS-4/10D-200. Into the same tank the CRS-7,5/10-200 puts 350 l/min more. Without a variable speed drive but with fixed speed, the machines are in the ABAC SPINN Mini series.
Short bursts are handled by the 100-litre too. But once you grind or spray for five minutes at a stretch, you find out that the bigger tank is not wasted.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Displacement: | 495 l/min |
| Pressure vessel volume: | 200 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 1/2" |
| Motor power: | 4.0 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 59 dB - Lwp(4m) |
| Weight: | 153 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
| Frequency converter: | Yes |
| Length: | 1,436 mm |
| Width: | 526 mm |
| Height: | 1,316 mm |
🔧 Šroubový vs. pístový kompresor – kdo vyhrává? 💨 Porovnání výkonu, hlučnosti a úspor ⚡
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
