Filtration, regulation and treatment of compressed air, Page 15
-
Treatment units basic units for air
-
Industrial filtration ISO 8573 - ISO 12500
-
Air dryers air moisture removal
-
Pressure regulators precision robust design
-
Cyclone separators cyclone filtration principle
-
Water-oil separators separates water from oil
best-selling products

High pressure regulator 1" for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 60 bar with a control range of 3.0 - 50...

Catalytic filters (hopcalite) AAFH2 in 1 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Catalytic filters (hopcalite) AAFH2 in 3/4" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-120. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-335. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-510. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

Proportional pressure regulator with flow rate 530 l/min, 0 - 1 bar control, controlled by 4-20 mA electrical signal. Integrated transducer to convert the electrical quantity to...

Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 3/4" and outlet pressure regulation 0,5 - 10 Bar. Maximum inlet...

Cyclone separator CHP1 with 3/4" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 100 bar, working...

Cyclone separator CHP1 with 3/8" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 100 bar, working...

Cyclone separator CHP1 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 100 bar, working...

MADRY-32 membrane dryer with compressed air flow up to 32 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 1 1/2" and outlet pressure regulation 0,5 - 16 Bar. Maximum inlet...

Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 1 1/2" and outlet pressure regulation 0,5 - 25 Bar. Maximum inlet...

MADRY-6 membrane dryer with compressed air flow up to 6 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

MADRY-12 membrane dryer with compressed air flow up to 12 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

MADRY-18 membrane dryer with compressed air flow up to 18 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

MADRY-24 membrane dryer with compressed air flow up to 24 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

MADRY-3 membrane dryer with compressed air flow up to 3 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

MADRY-44 membrane dryer with compressed air flow up to 48 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

Replacement diaphragm for MADRY-44M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Filter insert 5 for compressed air treatment units in Combibloc design from EWO.

MADRY-9 membrane dryer with compressed air flow up to 9 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

Replacement diaphragm for MADRY-12M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-3M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-24M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-18M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-32M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-6M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-9M compressed air compressor membrane dryer working on the principle of water separation using a hollow fibre membrane.

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

High pressure regulator 1" for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 60 bar with a control range of 2.0 - 35...

Hankison adsorption filter cartridge for CF series air microfilter type F03. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum...

Replacement container for FUTURA FA filters in size 2 without condensate drain. The activated carbon in the filter only absorbs aerosols. When the liner becomes clogged, it...

Filter support for MDX400 to 1800 condensation dryers for easy installation of filters without the need for expensive fittings. Easy assembly when installing the dryer. The...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

Proportional pressure regulator with flow rate 530 l/min, 0 - 1 bar control, controlled by 0-10 V electrical signal. Integrated transducer to convert the electrical quantity to...

Proportional pressure regulator with a flow rate of 530 l/min, 0 - 10 bar control, controlled by 0 - 10 V electrical signal. Integrated transducer to convert the electrical...