Compressors for all applications - hobby and industrial, Page 15
-
Black Wind reciprocating compressors; cheap and simple design
-
Atmos reciprocating compressors; PERFECT cast iron series
-
Walter reciprocating compressors; GK cast iron robust machines
-
ABAC reciprocating compressors; Line series
-
ABAC piston compressors; Extensive and Expert series
-
ABAC reciprocating compressors; Pro Zero oil-free series
-
ABAC reciprocating compressors; Pro Silent series
-
Super Silent compressors; super quiet oil-free design
-
INDUSTRIAL TECH compressors; industrial for continuous operation
-
CLR reciprocating compressors; oil-free dental design
-
Combustion compressors; petrol and diesel engines
-
Screw compressors; for continuous operation
-
Pressure vessels; self-contained and equipped
-
Compressor accessories; oil-drain-valves
.png)
Product sorting
List of products
Altair Ultra ALTU-5 synthetic oil is a high-performance lubricating oil for industrial compressors. It provides reliable wear protection, excellent high-temperature stability,...
A device that extends the compressor's warm-up run — prevents the formation of condensate inside the machine during short operating periods.
Intelligent compressor shutdown control for energy saving in operations with peak demand.
Version without air receiver — compressor on fixed feet for installation on a separate platform or into an existing distribution network.
Optional equipment — control panel equipped with an engine hour meter (Mth) for monitoring operating time and service planning.
Star-delta switch for smoother motor start-up — limits the starting current.
SEC 220 · 22 kW · delivery 3.8 / 3.1 m³/min · pressure 8 / 10 bar. 22 kW slow-speed machine (motor 2969 rpm) — for multi-shift industrial use. ATMOS...
SEC 300 · 30 kW · delivery 4.5 / 4 / 3.3 m³/min · pressure 8 / 10 / 13 bar. 30 kW industrial compressor for large-scale operations. ATMOS screw block...
SEC 300 Vario · 30 kW · displacement 4.5 / 4 / 3.3 m³/min · pressure 8 / 10 / 13 bar. 30 kW Vario with frequency inverter — 20–30% savings in operations...
SEC 372 · 37 kW · delivery 6.3 / 5.4 / 4.5 m³/min · pressure 8 / 10 / 13 bar. 37 kW top model of the SEC series — for the largest plants. ATMOS screw...
Industrial four-cylinder 7.5 kW at 13 bar with a displacement of 960 l/min and a 500 l tank. Low-speed operation at 725 min⁻¹ for long duty cycles.
Highest pressure and lowest speed in the entire range: 15 bar, displacement 900 l/min, four-cylinder 7.5 kW at 688 min⁻¹ and a 500 l tank. For testing laboratories and...
High-pressure version of the cast-iron twin-cylinder 4.0 kW: 13 bar, effective displacement 500 l/min, 270 l air receiver and slow-running 817 rpm. For technologies that do not...
Maximum pressure of the WALTER series – 15 bar on a 4.0 kW cast iron twin-cylinder, delivery 470 l/min and a 270 l air receiver. For pressure tests and technologies requiring a...
The only vertical compressor in the WALTER range for standard 230 V: cast iron twin-cylinder 2.2 kW, displacement 340 l/min at 10 bar and a 90 l vertical receiver. It...
Vertical entry-level WALTER design: cast iron twin-cylinder 2.2 kW with a displacement of 340 l/min at 10 bar and a 90 l vertical air receiver. Same unit as the horizontal...
WALTER series vertical compressor with a 3W three-cylinder unit: 3.0 kW, displacement 440 l/min at 10 bar and a 90 l vertical air receiver. The most powerful of the vertical...
Vertical version of the mid-range series: cast iron twin-cylinder 4.0 kW, displacement 550 l/min at 10 bar, 993 rpm and a 270 l vertical air receiver. The largest capacity...
The most powerful vertical compressor in the WALTER range: a three-cylinder cast iron unit 5.5 kW with a delivery rate of 740 l/min at 10 bar, 902 rpm and a vertical receiver...
The highest displacement in the WALTER range: a four-cylinder cast iron unit 7.5 kW with a displacement of 1 100 l/min at 10 bar and a 500 l air receiver. The speed of 768 rpm...
The largest capacity offered by the WALTER 230 V range: a 2.2 kW cast iron unit with a displacement of 340 l/min and a 200 l horizontal air receiver.
Entry-level cast iron platform 2.2 kW with the largest tank built by WALTER: 200 l capacity, delivery rate 340 l/min, 400 V. For workshops with intermittent but heavy demands.
The pinnacle of the WALTER three-kilowatt class: a three-cylinder cast-iron unit with a displacement of 440 l/min and a 270 l air receiver. Designed for tyre services and...
The most powerful unit of the WALTER range: four-cylinder 7.5 kW on a base frame without a pressure vessel, displacement 1 100 l/min at 768 rpm. For central distribution with...
Standalone cast-iron twin-cylinder 2.2 kW on a base frame, without pressure vessel. Delivery rate 340 l/min at 10 bar, 400 V. For replacing the unit on an existing vessel or for...
The only WALTER unit for standard 230 V: a cast-iron twin-cylinder 2.2 kW on a base frame without a tank, displacement 340 l/min. For workshops and mobile assemblies without a...
Three-cylinder cast iron unit 3.0 kW on a base frame, without pressure vessel. Delivery rate 440 l/min at 10 bar and quieter operation with the 3W arrangement – for custom...
Cast-iron twin-cylinder 4.0 kW on a base frame, without pressure vessel. Displacement 550 l/min at low-speed 993 rpm – unit for continuous operation and custom assembly.
Three-cylinder cast iron unit 5.5 kW on a base frame, without pressure vessel. Discharge 740 l/min at 902 rpm – source for central distribution or a second machine in a cascade.
Compact oil-immersed piston compressor with small footprint. The foldable high handle included with the machine ensures easy handling along with the strong base and larger...
Compact oil-immersed piston compressor with small footprint. The foldable high handle included with the machine ensures easy handling along with the strong base and larger...
