Oil-lubricated compressor ABAC L25P-1.8-24CM motor power 1.8 kW, air intake 270 l/min, pressure 10 bar, horizontal air receiver 24 l, voltage 230/50 V/Hz
Code: L25P-1-8-24CM
Related products
Product detailed description
24 l · 1.8 kW · 28 kgThe smallest and lightest oil-lubricated compressor in the range. The L25P-1.8-24CM weighs 28 kg, the L25P pump with 1.8 kW draws in 270 l/min and the 24 l tank on wheels fills to 10 bar in a few tens of seconds. For a stapler, a nailer, a tyre inflator and blowing off it is everything a workshop or a van needs — from an ordinary socket, with a regulator and two gauges from the factory.
Why a twenty-four with 1.8 kW
A small tank and the weaker pump are no compromise when the tools take air in bursts. The stapler fires, the tank drops by a few tenths of a bar and the pump tops it up before you pull the trigger again; the motor cycles calmly and cools down in between. Twenty-eight kilos you lift into the van in one go, and in the workshop the machine slides under the bench. If you want an impact wrench or short spraying jobs, reach for the fifty; if all you want is more air from the same tank, reach for the L30PN-2.2-24CM.
Equipment and details
What the L25P-1.8-24CM has from the factory
- single-cylinder oil-lubricated L25P pump with direct drive, 1.8 kW, 2,850 rpm
- single-phase 230 V / 50 Hz motor, thermal overload protection, cover with a fan and a recessed intake filter
- horizontal 24 l tank, 10 bar, condensate drain valve underneath
- automatic stop/start pressure switch, outlet pressure regulator, two gauges, DN 7.2 quick coupling
- two wheels, rubber foot, short rubber-gripped handle
- oil sight glass on the outside, fill volume approximately two decilitres
- QR code on the tank opens service videos in the AirTube app
- 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the L25P-1.8-24CM is not the right fit
The same tank with the stronger pump is the L30PN-2.2-24CM — 310 l/min for one kilo more. A longer reserve for an impact wrench comes with the L25P-1.8-50CM. All six versions side by side are on the L25P and L30P range page; twenty-four-litre machines from other brands are among compressors with a 24 l tank. For the first service, add ALTAIR oil for one change.
Values apply to a 230 V / 50 Hz supply. The noise figure is the sound power level Lwa; at 4 m from the machine it is roughly 20 dB less. The machine is built for intermittent duty, not for continuous operation.
Ventilek advises
Twenty-eight kilos and 24 litres — a compressor that rides in the van with the joiner, not one you walk over to.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| EAN: | 0745125779140 |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 270 l/min |
| Air delivery: | 162 l/min |
| Pressure vessel volume: | 24L |
| Design of pressure vessel: | Lying down |
| Connecting: | Quick coupling DN 7.2 |
| Motor power: | 1.8 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 2850 rpm |
| Number of cylinders: | 1 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 95 dB - Lwa, 75 dB - Lwp(4m) |
| Dimensions: | 630 × 320 × 620 mm |
| Weight: | 28 kg |
| Accessories: | Pressure regulator, Wheels, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Semi-professional |
| Development: | Mobile |
| In stock: | External warehouse |
Instalace kompresoru
Odpouštění kondenzátu
Servisní KIT kompresoru a výměna
Údržba sacího filtru
Uvedení do provozu
Výměna oleje u kompresoru
Výměna pístu a těsnění
Výměna sacího filtru a údržba zpětného ventilu
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
