Compressors for all applications - hobby and industrial, Page 4

The WK650-5.5/270P reciprocating compressor with a cast iron twin cylinder unit and 270 litre air receiver delivers 5.5 HP, 10 bar pressure and an effective displacement of 550...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2000 mm and straight end...

Separate replacement oil sight glass for compressor with 1 1/4" male pipe thread. Anodized aluminium star with a red dot in the middle for better contrast. Material :...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2000 mm with straight and...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm and straight ends.

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2000 mm with straight and...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm with straight and...

Pressure vessel with a capacity of 50 l in upright or vertical design. The aerator is designed for the medium compressed air and is built on a base which is part of the whole...

Pressure vessel without base with a volume of 5 litres in a recumbent design. The aerator is designed for compressed air medium and is made without feet. The maximum operating...

Professional piston compressor with an output pressure of 10 bar designed especially for use in craft applications. Oil-lubricated design with 1.5 kW motor input, 24 litre...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm and straight end...

Inexpensive oil piston compressor with an output pressure of 8 bar designed especially for occasional use in craft applications and for home use. Oil-lubricated machine with 2.2...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2500 mm and straight end...

The WK550-4.0/200P reciprocating compressor with a cast iron three-cylinder unit and a 200 litre air tank delivers 4 HP, 10 bar pressure and an effective displacement of 440...

Pressure vessel with a volume of 50 l in a recumbent design on a base. The aerator is designed for the medium compressed air. The maximum operating pressure is 11 bar. The...

Separate A39 compressor units with an input power of 2.2 kW. Designed for professional use. Oil-lubricated design, single-stage compressor with two pistons. Delivery including...

The WK900-7.5/270P reciprocating compressor with a cast iron three-cylinder unit and 270 litre air receiver delivers 7.5 HP, 10 bar pressure and an effective displacement of 740...

Pressure switch for controlling the piston compressor. Voltage 400/50 V/Hz and current 16 A. Possibility to adjust the lower and upper pressure limits. Easy to operate by means...

Low-speed V-belt reciprocating compressor with 11 bar output pressure for use in workshop and industrial applications. Stationary oil-lubricated version with a motor power of...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2000 mm and straight ends.

Pressure switch for controlling the piston compressor. Voltage 400/50 V/Hz and current 6.3 A. Possibility to adjust the lower and upper pressure limits. Easy to operate by means...

The state-of-the-art EMD25 condensate drainage system with a compressor flow rate of up to 15,400 l/min and automatic operation control, fault detection and no air discharge....

Separate A29 compressor units with an input power of 1.5 kW. Designed for professional use. Oil-lubricated design, single-stage compressor with two pistons. Delivery includes...

Separate A39B compressor units with an input power of 3 kW. Designed for professional use. Oil-lubricated design, single-stage compressor with two pistons. Supplied with...

Pressure vessel without supports with a volume of 24 l in a horizontal design. The aerator is designed for compressed air medium and is made without feet. The maximum operating...

Set of fittings for complete installation of pressure vessel and air tank with volume 500 L. The set includes the following products including all settings and documentation :...

The state-of-the-art EMD12 condensate drainage system with a compressor flow rate of up to 7,400 l/min and automatic operation control, fault detection and no air discharge....

Original high quality lubricants for MARK screw compressors. Additives to ensure special properties and for perfect lubrication of the screw compressor. Rotair oils: mineral...

The ATMOS large round suction filter with 1" external pipe thread serves as protection against dirt entering the machine and should be replaced regularly. ATMOS compressors are...

The state-of-the-art EMD75 condensate drainage system with a compressor flow rate of up to 46,200 l/min and automatic run control, fault detection and no air discharge. Directly...

Professional V-belt reciprocating compressor with an output pressure of 15 bar designed for use in tire shops and other applications requiring pressures higher than 10 bar....

Service kit for ATMOS 1 year machine maintenance with marking N770301. The kit includes all the necessary parts for annual servicing of the machine. There is also a QR code in...

Power input 2,2 kW, suction power 393 l/min, pressure 10 bar, airbox 100 l, voltage 230/50 V/Hz. Professional V-belt reciprocating compressor with an output pressure of 10 bar...

The oil-lubricated screw compressor with extreme volumetric performance and liquid-cooled PM motor IE4 has been developed especially with the most efficient compressed air...