10 bar air compressors, Page 6

Bare unit with a motor rated at an input of two point two kilowatts. Sixty litres more air than the smallest machine in the range, with the same footprint and only four...

Bare unit with a motor rated at an input of two point two kilowatts. Sixty litres more air than the smallest machine in the range, with the same footprint and only four...

The smallest machine in the series and the most affordable way to achieve continuous operation. A unit with the motor on a common baseplate, without a frame and without a tank —...

The smallest machine in the range on a steel base frame with a terminal box. Ready to be bolted down or set on anti-vibration mounts, with no further work. It weighs 70 kg.

The smallest machine of the range on a steel base frame with a control box. Ready to be anchored to the floor or set on anti-vibration mounts, with no further assembly. It...

The smallest machine in the series as a bare unit with motor on a common base plate, without frame and without a tank — for integration into your own installation. At 45...

Compact oil-immersed piston compressor with small footprint. The foldable high handle included with the machine ensures easy handling along with the strong base and larger...

Compact oil-immersed piston compressor with small footprint. The foldable high handle included with the machine ensures easy handling along with the strong base and larger...

A two-point-two kilowatt machine on a steel base frame. The usual choice for a smaller workshop with an air main, where the compressor is to stay put. It weighs 71 kg.

E.220KV-VARIO in Komfort version (soundproof steel canopy), with 500 l air receiver (horizontal) · 20 kW · pressure 10 bar · capacity 1.10 – 3.30 m³/min. 20...

The smallest machine in the range at the highest pressure. 2,300 l/min at ten bar, an enclosure of 1,200 × 800 mm and 66 dB(A) — for a workshop where people work alongside it.

E.65 KV Vertical in Comfort version, with a 270 l air receiver, vertical arrangement · 7.5 kW · pressure 10 bar · capacity 1.0 m³/min. Higher power class...

Compressor, dryer and 200 l receiver on one frame in 0.82 m². The entry 3-in-1 package delivering 320 l/min, with no assembly certification needed.

E.150K-VARIO in Comfort version (soundproof steel housing), without receiver · 15 kW · pressure 10 bar · capacity 1.3 – 2.7 m³/min. Vario variant E.140 /...

SEC 220 · 22 kW · delivery 3.8 / 3.1 m³/min · pressure 8 / 10 bar. 22 kW slow-speed machine (motor 2969 rpm) — for multi-shift industrial use. ATMOS...

The only vertical WALTER for a standard socket: the upright tank stands against a wall and occupies a footprint of 63 × 54 cm. Its 340 l/min air delivery is enough for blowing,...

A vertical version for a workshop short of floor space: the upright tank takes up a footprint of 63 × 54 cm and can stand against a wall. The cast-iron twin delivers 340 l/min...

Three-cylinder performance on a footprint of 63 × 56 cm: a vertical version for a workshop that needs more air than the smallest class but has nowhere to put a horizontal...

The same unit and tank as the horizontal WK650, just standing upright: a footprint of 65 × 70 cm instead of 165 cm of length. Its 550 l/min air delivery covers painting plus a...

Central air supply for the workshop: sandblasting, three points of use at once, an air network across the hall. The four-cylinder unit at 768 rpm delivers 1,100 l/min, the most...

The largest tank the range offers for a standard socket: for a workshop without three-phase power where air is drawn in bursts, but in large amounts. The 340 l/min air delivery...

A small unit with a large tank for a workshop with intermittent but heavy air demand: the reserve holds the pressure for longer than the 340 l/min air delivery alone could keep...

A machine for a single tyre-service bay: impact wrench and tyre changer with no waiting for the pressure to build back up. Three cylinders in a W and a large tank keep the...

The most powerful unit in the range, without a tank, for a compressor room with its own air receiver or a central air network. Four cylinders in two V pairs run at 768 rpm and...

A cast-iron unit for a workshop that already has a working pressure tank and needs a new air supply. The twin-cylinder unit runs at 1,276 rpm and delivers 340 l/min for blowing,...

A unit on a base frame for a workshop without a three-phase supply: it replaces a worn-out compressor on a tank that is still in good working order. The cast-iron twin delivers...

A three-cylinder unit on a base frame for a working tank with a valid inspection whose motor or compressor pump has reached the end of its life. The W layout spreads the...

The unit from the most requested class of the range, without a tank: for a compressor room or your own assembly on a working tank. The large-bore twin runs at 993 rpm and...

A three-cylinder unit for two workstations running at the same time, without a tank: for a compressor room or an existing air receiver with a valid inspection. The W layout at...

No longer supplied, on request: A39 pump with 2.2 kW on 230 V, 393 l/min, 10 bar, 100 l tank on castors, 70 kg. Replacement with the same pump: the A39X-2.2-100CT on 400 V.