Mobile compressor ABAC L20N-1.5-24CM motor power 1.5 kW, air intake 220 l/min, pressure 10 bar, horizontal air receiver 24 l, voltage 230/50 V/Hz
Code: L20N-1-5-24CM
Related products
Product detailed description
24 l · 10 bar · 25 kgA 24 l compressor on wheels that one person loads into the car. The L20N-1.5-24CM weighs 25 kg and its L20 pump with 1.5 kW draws in 220 l/min; the tank holds a reserve for a nailer firing in quick succession, for a ratchet wrench and for longer blowing off, and the switch fills it to 10 bar. You wheel it to the car by the handle, lift it into the boot on your own, and at home it runs from an ordinary socket.
A 24 l compressor as the middle of the range: a reserve you can still lift
Against the six it has a tank four times the size and two bar more on the switch. In practice that means the nailer fires evenly even in quick succession, the ratchet wrench does not flag and when blowing off the motor does not cut in after every squeeze of the trigger — the pump runs in calm cycles and cools down in between. And it is still 25 kg: wheels round the workshop, one person into the boot. If you need more air than 220 l/min, reach for the L25P with the same tank.
Equipment and details
What the L20N-1.5-24CM has from the factory
- single-cylinder oil-lubricated L20 pump with direct drive, 1.5 kW, 2,850 rpm
- single-phase 230 V / 50 Hz motor, thermal overload protection, cover with a fan and a recessed intake filter
- horizontal 24 l tank, 10 bar, condensate drain valve underneath
- automatic stop/start pressure switch, outlet pressure regulator, two gauges, DN 7.2 quick coupling
- two wheels, rubber foot, handle
- oil sight glass on the outside, fill volume approximately two decilitres
- QR code on the tank opens service videos in the AirTube app
- 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the L20N-1.5-24CM is not the right fit
If a stapler and inflating are all you need, you save eleven kilos with the L20N-1.5-6CM; if you want a longer reserve, take the L20N-1.5-50CM. The same tank with the stronger 270 l/min pump is the L25P-1.8-24CM. The table of all three machines is on the L20N range page, and twenty-four-litre machines from other brands are among compressors with a 24 l tank.
Values apply to a 230 V / 50 Hz supply. The noise figure is the sound power level, 95 dB Lwa; at 4 m from the machine that is roughly 75 dB. The machine is built for intermittent duty S3 30%, not for continuous operation.
Ventilek’s tip
The twenty-four is the middle of the range — enough reserve for a ratchet wrench, and you can still lift it into the boot on your own.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| EAN: | 0745125779126 |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 220 l/min |
| Air delivery: | 121 l/min |
| Pressure vessel volume: | 24L |
| Design of pressure vessel: | Lying down |
| Connecting: | Quick coupling DN 7.2 |
| Motor power: | 1.5 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 2850 rpm |
| Number of cylinders: | 1 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 95 dB - Lwa, 75 dB - Lwp(4m) |
| Dimensions: | 610 × 310 × 580 mm |
| Weight: | 25 kg |
| Accessories: | Pressure regulator, Wheels, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Semi-professional |
| Development: | Mobile |
| In stock: | In store, External warehouse |
Instalace kompresoru
Odpouštění kondenzátu
Servisní KIT kompresoru a výměna
Údržba sacího filtru
Uvedení do provozu
Výměna oleje u kompresoru
Výměna pístu a těsnění
Výměna sacího filtru a údržba zpětného ventilu
Product rating
Leave a rating
List of ratings
Prener František
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
