Professional air compressors, Page 3

A 4-in-1 package with a 500 litre vessel. The same compressor as the 270 version but with nearly twice the air reserve — for plants with bursty demand.

The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.

The strongest 4-in-1 package with a 500 litre receiver. Compressor, vessel, refrigeration dryer and pre-filter on one frame — class 2-4-2 air without assembling components piece...

The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).

The middle 8-in-1 package. To the 270 l receiver, dryer and pre-filter it adds a micro-filter, an activated-carbon filter and a condensate separator — the air exceeds class 1-4-1.

An 8-in-1 package with a 500 litre vessel. The cleanest air plus a large reserve — for plants that draw in bursts and cannot have oil in the air.

The top of the range. Highest output, largest vessel and the fullest equipment — two thousand litres a minute, 500 l of reserve and air that exceeds class 1-4-1.

Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...

The middle bare machine of the range. It controls from 800 to 1,500 l/min and takes a footprint of 900 × 820 mm. For plants that handle the receiver and air treatment centrally.

The strongest bare machine in the range. Two thousand litres a minute at peak, yet the same cabinet as the 11 kW — five kilowatts more without asking for a centimetre of extra...

The entry screw compressor of the range, without a receiver. 320 l/min at ten bar, 180 kg and a footprint of just 0.39 m² — for a workshop that already has a receiver.

The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...

The choice for a workshop that has outgrown the entry model. The three-kilowatt motor delivers 366 l/min at 10 bar — a quarter more air than the SPM-2,2, yet the noise stays at...

The first model in the range that can handle tools drawing air continuously — grinders, sandblasting guns, longer blasting jobs. The four-kilowatt motor delivers 516 l/min at 10...

The most powerful machine in the SPINN Mini range: 780 l/min at 10 bar, which is 2.65 times the output of the entry model. It handles a spray gun and several workstations at...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

An eleven-kilowatt set with a 500-litre receiver and a refrigerant dryer. 1,416 l/min at 10 bar, 69 dB(A). Dry air for pipework serving several people at once.

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The best-equipped set in the range. A fifteen-kilowatt compressor, a 500-litre receiver and a refrigerant dryer in one frame. 1,680 l/min at 10 bar, 71 dB(A), weight 300 kg.

The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry...

Compressor, 500-litre receiver and refrigerant dryer in one unit. 996 l/min at 10 bar, 7.5 kW, 65 dB(A). Dry air and a reserve for peak demand without assembling a set.

Complete set for smaller operations with intermittent demand and dried air: compressor, tank, dryer and filters all in one unit. Housing 1,970 × 720 × 1,700 mm, weight 395 kg,...

Complete assembly for operation with multiple extraction points, where dried air and reserve capacity in the air tank are required. Dimensions 1,970 × 720 × 1,700 mm, G ¾″...

A complete setup for a workshop that wants dried and filtered air directly from the machine and doesn't want to assemble individual components. It weighs 382 kg, the connection...

Complete set for operation with higher consumption, where dried and filtered air is required directly from the machine. It weighs 421 kg, the connection is G ¾″ and the noise...

The smallest machine at the top equipment level. It turns down to 130 l/min and up to 320, yet does everything the larger assemblies do — two-stage filtration, automatic...

The middle machine at the top equipment level. A 200–510 l/min range covers a workshop with several stations, and adds two-stage filtration, automatic condensate drainage and a...

The SCR-2/10XA is an oil-free scroll compressor with a free air delivery of 200 l/min (12 Nm³/h) at 10 bar and a total power input of 2.2 kW. The air is compressed by a single...

The SCR-4/10XA is an oil-free scroll compressor with a free air delivery of 350 l/min (21 Nm³/h) at 10 bar and a total power input of 3.7 kW. The air is compressed by a single...

The SCR-7/10XA is an oil-free scroll compressor with a free air delivery of 700 l/min (42 Nm³/h) at 10 bar and a total power input of 7.4 kW. The air is compressed by 2 scroll...

Complete assembly in a larger enclosure for medium-duty operation requiring dried air from a single unit. Dimensions 1,970 × 760 × 1,750 mm, weight 487 kg, connection G ¾″,...

The most powerful and at the same time the heaviest assembly of the SFTG KSP series, for operation with higher consumption of dried air. Housing 1,970 × 760 × 1,750 mm, G ¾″...

A complete fixed-speed assembly for continuous consumption of dry air. The dryer and filters are integrated in a single unit with the compressor and air tank. Dimensions 1,970 ×...

The most powerful assembly in the SKTG KSP range for operation with higher but constant consumption of dried air. Housing 1,970 × 725 × 1,750 mm, weight 487 kg, connection G ¾″,...

A complete set for laser cutting: machine, air tank, dryer and five filters in one unit. It weighs 510 kg, the cabinet measures 1,970 × 860 × 1,660 mm and the noise level is 62...

A complete set for smaller operations that need dried air without a separate dryer and filters. Housing 1,683 × 739 × 1,629 mm, weight 369 kg, connection G ¾″, noise level 60...

A higher-performance assembly for operation that requires dried air as well as higher pressure. Housing 1,683 × 739 × 1,629 mm, weight 369 kg, connection G ¾″, noise level 60...