Screw compressor SPM-2,2/10D-200 power consumption 2.2 kW, discharge capacity 294 l/min, pressure 10 bar, air receiver 200 l, voltage 400/50 V/Hz + dryer
Code: SPM-2-2/10D-200
Related products
Product detailed description
Lowest consumption in the rangeThe smallest screw compressor we supply as a complete package. The motor has 2.2 kW and delivers 294 litres of air per minute at 10 bar — equivalent to 17.7 m³/h according to ISO 1217.
It makes sense where a piston compressor has stopped keeping up: the screw element may run continuously, so you do not have to wait for the machine to cool down. At 190 kg it is also the lightest in the range.
What sets the SPM-2,2/10D-200 apart
- 2.2 kW motor, 294 l/min output at 10 bar — 17.7 m³/h according to ISO 1217
- the lowest energy consumption in the range and at the same time the lightest package, 190 kg
- noise level 61 dB(A) — together with the 3 kW model the quietest of the four
A one-person workshop, service bay or assembly bench — tools that draw air in bursts: impact wrench, blow gun, tyre inflation.
If you're torn between models, this twin is most often compared with the SPM-3/10D-200. It delivers 72 l/min more at the same noise level. Power supply is another question: when there's no three-phase connection in the workshop, the SPD-2,2/10CW-90 model from the ABAC SPINN.D range offers standard 230 V operation.
Equipment shared by the whole SPINN Mini range
C43 screw air end
The latest generation of air end with high compression efficiency, belt driven.
Condensation dryer
With a dew point indicator and eco-friendly R513A refrigerant. Removes water from the air.
200 l air tank
The air reserve covers peak demand without the motor having to start.
Infologic² unit
A monochrome display with operating settings and machine status indication.
Warranty and service
- 10 years against corrosion of the air receiver
- option to extend the warranty to 5 years (code ABA-5R, 5% of the machine price)
- service intervals of 2,000 – 4,000 – 6,000 running hours
- the machine is intended for craft businesses and workshops that require continuous compressor operation
When tools draw air continuously. A grinder or sandblasting gun draw air constantly, not in bursts. For these, 294 l/min is not enough — go for the SPM-4/10D-200.
Two hundred litres sounds nice, but the receiver only covers a short peak. Whatever runs non-stop has to be handled by the air end — and here it gives 294 litres per minute.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Air delivery: | 294 l/min |
| Pressure vessel volume: | 200 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 3/4" |
| Motor power: | 2.2 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Dimensions: | 1 430 × 600 × 1 260 mm |
| Weight: | 190 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | No |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
