Industrial ABAC Tech compressor - ATL-2,2-BT motor 2.2 kW, 210 l/min at 10 bar, intake 504 l/min, on a base frame, supply 400/50 V/Hz, 99 dB Lwa / 79 dB at 4 m
Code: ATL-2-2-BT
Related products
Product detailed description
ABAC Tech ATL · S1 100 % · on a frameThe sensible middle of the range. ATL-2.2-BT delivers 210 l/min at 10 bar and stands on a steel base frame with a terminal box, so it is brought in and connected. The S1 motor may run the whole shift without pauses. At 71 kilograms it is the heaviest machine that still starts directly, without star-delta.
Why this machine is usually the first choice
It is the last machine in the range with direct starting. From four kilowatts upwards every version has star-delta, which means matching protection and usually a word with an electrician. This one connects to an ordinary three-phase 400 V supply with nothing further to think about.
At the same time it delivers 210 l/min at ten bar, which covers one or two stations with a steady draw. The frame adds 22 kg over the bare unit, and with them the option of bolting it down.
Equipment and details
What ATL-2,2-BT does as delivered
- single-stage oil-lubricated pump with two cylinders in a V, 1,500 rpm
- 2.2 kW motor in duty type S1, that is a 100% duty cycle with no pauses to cool down
- direct drive without belts — the pump sits straight on the motor
- set on a steel base frame with a terminal box; the machine can be bolted to the floor or set on anti-vibration mounts
- electric motor 400/50 V/Hz, three-phase supply, direct starting
- intake 504 l/min, 210 l/min delivered at a working pressure of 10 bar
- aluminium-silicon cylinders with heavy finning, stainless valves, bearings greased for the whole service life
- no pressure vessel — the air goes into the pipework or into a separate receiver
- weight 71 kg, dimensions 686 × 575 × 631 mm; noise 99 dB Lwa, at 4 m 79 dB
- two-year warranty
Machine details
Where to go if ATL-2,2-BT does not fit
Without the frame it is the same machine, ATL-2,2-T; smaller is ATL-1,5-BT; above it comes ATL-4-BTX with star-delta. The whole overview is in the overview of the whole category, the machines already on a receiver in the version on a receiver.
The delivered figure is the air the machine supplies at a working pressure of 10 bar; the intake is the volume the pump draws in. Noise is given as the sound power level Lwa from the machine plate and as the sound pressure at 4 m from the machine. Performance data according to ISO 1217, Annex C, noise according to ISO 2151.
Ventilek recommends
This is the last machine in the range where you need not think about starting. From four kilowatts upwards it is worth asking an electrician before you order.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 504 l/min |
| Air delivery: | 210 l/min |
| Pressure vessel volume: | It isn't |
| Motor power: | 2.2 kW |
| Mains voltage: | 400/50 V/Hz |
| Speeds: | 1500 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 99 dB - Lwa, 79 dB - Lwp(4m) |
| Weight: | 71 kg |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Industrial |
| Development: | Stationary |
| Dimensions: | 686 x 575 x 631 mm |
Detailed description of the ABAC TECH range
Introducing the ABAC TECH industrial range
Performance of the ABAC TECH series
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
