Professional air compressors, Page 13

SEC 221 Vario · 22 kW · delivery 3.9 / 3.2 / 2.4 m³/min · pressure 8 / 10 / 13 bar. 22 kW Vario with Danfoss VLT inverter — 20–30% energy savings. ATMOS...

SEC 302 · 30 kW · delivery 5.2 / 4.4 / 4.1 m³/min · pressure 8 / 10 / 13 bar. 30 kW with higher delivery (block A 150) and lower noise level 65 dB — premium...

SEC 302 Vario · 30 kW · delivery 5.2 / 4.4 / 4.1 m³/min · pressure 8 / 10 / 13 bar. 30 kW Vario premium — block A 150, lower noise level 65 dB, energy...

SEC 372 Vario · 37 kW · delivery 6.3 / 5.4 / 4.5 m³/min · pressure 8 / 10 / 13 bar. 37 kW Vario — top model with an inverter, 20–30% energy savings....

ST 110 · 110 kW · delivery 19.1 / 17.5 / 15.3 / 13.1 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-20-G-R IE3 motor — high efficiency,...

ST 110 Vario · 110 kW · delivery 19.1 / 17.6 / 15.3 / 13.2 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-20-G-R IE3 motor — high...

ST 37+ · 37 kW · delivery 7.2 / 7 / 6.3 / 4.9 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block A 150 5th generation (City University) IE3 motor —...

ST 55 Vario+ FD · 55 kW · delivery 8.9 / 8.7 / 8.1 / 7.6 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block A 150 5th generation (City University)...

ST 75 FD · 75 kW · delivery 12.7 / 12 / 10.8 / 9.3 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-14-G-R IE3 motor — high efficiency,...

ST 75 Vario FD · 75 kW · delivery 12.7 / 12 / 10.8 / 9.3 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-14-G-R IE3 motor — high efficiency,...

ST 75 Vario+ · 75 kW · delivery 13.4 / 13.3 / 12.5 / 9.7 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-14-G-R IE3 motor — high efficiency,...

A standalone screw unit for an existing receiver. It delivers 498 l/min at 10 bar and, thanks to the variable speed drive, runs only as fast as you actually draw. Noise 60...

Compressor and a hundred-litre receiver in one unit — the smallest package in the CROSS range. 498 l/min at 10 bar; the variable speed drive holds pressure steady, so a smaller...

The most popular package in the range: a rotary screw compressor with a two-hundred-litre receiver. 498 l/min at 10 bar feeds two or three air tools at once. The variable speed...

The stronger of the two CROSS versions, without a receiver. It delivers 848 l/min at 10 bar, seventy percent more than the four-kilowatt model — for several tools at once or...

Highly economical screw compressor with variable speed control by inverter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4 permanent...

The most powerful machine in the range without a receiver — 696 l/min, twice the 3 kW. Still 180 kg and a 650 × 600 × 860 mm enclosure.

Highly economical screw compressor with variable speed control by inverter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4 permanent...

The last machine in the range with a DN 50 outlet — above it the pipework goes to DN 65. 13,000 l/min at eight bar, regulation from 3,600.

The same machine on a two-hundred-litre vessel: 272 l/min at 10 bar, noise 59 dB(A). The bigger air reserve covers a full day of demand without the compressor cutting in...

A rotary screw compressor you plug into an ordinary socket — it runs on 230 V, so no three-phase supply is needed. It delivers 272 l/min at 10 bar and measures only 59 dB(A)....

A standalone 15 kW screw compressor delivering 2,215 l/min at 10 bar. Of the three it makes the most air per kilowatt. The quietest (67 dB) and the lightest (313 kg), though its...

A complete compressed-air station: a 15 kW compressor delivering 2,215 l/min, a 500-litre receiver and a refrigerant dryer on one frame. Connect power and pipework — nothing is...

A complete compressed-air station: an 18.5 kW compressor delivering 2,590 l/min, a 500-litre receiver and a refrigerant dryer on one frame. The middle of the three complete...

A standalone 22 kW screw compressor delivering 3,090 l/min at 10 bar. The strongest machine in the range, on a 1,130 × 780 mm footprint — the same as the 15 kW.

The largest complete compressed-air station in the range: a 22 kW compressor delivering 3,090 l/min, a 500-litre receiver and a refrigerant dryer on one frame. The most powerful...

A standalone screw unit without a receiver. It delivers 996 l/min at 10 bar from a footprint of 850 × 720 mm, so it fits even where the receiver already stands. V-belt drive,...

The smallest in the range with a variable speed drive. It regulates steplessly from 131 to 293 l/min, so it makes only as much air as you are drawing. 200 l receiver,...

The 3 kW regulates from 139 to 360 l/min and still stays at 57 dB(A) like the smallest model. 67 l/min more at the top for the same noise. 200 l receiver and refrigerant dryer.

The 4 kW regulates from 270 to 503 l/min at 58 dB(A). It feeds two or three pneumatic tools at once and drops back when demand falls instead of idling. 200 l receiver with dryer.

The strongest in the range. It regulates from 337 to 757 l/min, the widest range of all four models. It feeds several workstations at once. 200 l receiver, refrigerant dryer, 61...

A machine for smaller operations with fluctuating consumption, oil is separated in it by an immersion separator. The housing with a footprint of 1,090 × 730 mm weighs 243 kg,...

A machine for smaller production with fluctuating demand, which can optionally be fitted with a tank and dryer. It weighs 243 kg, the connection is G ¾″ and the noise level is...

A machine with an inverter for medium-sized operations where air consumption varies. It weighs 378 kg, noise level is 64 dB(A). The G 1″ connection and cabinet with a floor plan...

A large standalone machine with an inverter for production with variable air consumption. It weighs 4,000 kg, the connection is DN 65 and the noise level is 77 dB(A). The air...

The smallest two-stage WALTER for operation that runs full shifts and doesn't want to waste electricity. The housing with a footprint of 1.5 × 1.04 m weighs 738 kg and the...

Single-stage machine with an inverter for operation that will not run full shifts. It is 320 kg lighter than the two-stage SF 22 DSP. The connection is G 1″, noise level 64 dB(A).

Basic model from a range of three machines in a common housing for medium-sized operations with fluctuating consumption. It weighs 518 kg, the connection is G 1½″ and the noise...

The smallest two-stage WALTER, capable of handling up to 13 bar. It shares a housing with the SF 30 DSP and weighs 841 kg. Connection G 1½″, noise level 65 dB(A).

Middle machine out of three in a common enclosure, suitable for medium-duty operation with fluctuating consumption. It weighs 591 kg, the connection is G 1½″, noise level is 66...