Air compressors, Page 2

Replacement non-return valve for piston compressor. Connection to the air tank external thread 1/2". Compressor connection external thread 1/2". Viton seal. Prevents backflow of...

A kit for mounting an expansion or pressure vessel on a wall: a steel bracket with rubber inserts, a stainless steel clamping band with a quick-release fastener, 2 screws, 4...

An air receiver for built-in use where length is limited: it holds 50% more air than the 10-litre version and is less than two centimetres longer. Without feet, it fits into a...

Replacement suction filter insert for large round suction filter for ATMOS compressors. This filter cartridge is found in ATMOS Perfect series piston compressors with an output...

Suction filter for piston compressors BB-2,2-50CM.

Replacement non-return valve for piston compressor. Connection to the air tank, 3/4" male thread. Compressor connection external thread 1/2". Viton seal. Prevents backflow of...

A replacement oil sight glass for a compressor with a G 1/2" pipe thread. Outer diameter 26 mm, window 14 mm, tightened with a 22 mm spanner. Transparent PA-T technopolymer...

A small horizontal air receiver that already has a top connection for a pressure gauge or safety valve. It stands on two feet with bolt holes and fits under a workbench or on a...

The middle relay in the plain threaded version. The commonest replacement for a worn-out switch on a production three-phase compressor.

The most powerful single cylinder in the range: 1.8 kW, 233 l/min, 50 l tank on wheels, 32 kg. A sixth more air than the basic fifty at the same noise.

Replacement non-return valve for piston compressor. Connection to the air tank external thread 3/8". Connection to the compressor external thread 3/8". Viton seal. Prevents...

A 3/4" rubber hose, 1.5 m long, with a 90° elbow at one end for connecting a compressor to an air receiver. Working pressure 20 bar; swivel nuts and two male-thread adaptors...

A quarter-litre bottle for small compressors that are not used every day. It fits in the case with the tools and does not leave you half a canister standing in the workshop for...

The large round ATMOS suction filter with 3/4" male pipe thread serves as protection against dirt entering the machine and needs to be replaced regularly. ATMOS compressors are...

A 1" rubber hose, 1.5 m long, with one straight end and a 90° elbow at the other for compressor stations. Working pressure 20 bar; swivel nuts and two adaptors supplied.

A twenty-litre canister of an oil with twice the interval of the basic Rotair and still not synthetic. The commonest choice for ordinary industrial duty.

Suitcase compressor with a 6 l tank: 10 kg, oil-free 1.1 kW pump, 160 l/min, 8 bar, regulator and two gauges, hose in the compartment. For a stapler and small spray jobs;...

The lighter of the SUITCASE suitcase compressors: 5 kg, oil-free 1.1 kW pump, 160 l/min, 8 bar, no tank. Hose in the compartment under the lid, one button — for inflating,...

A five-litre canister for compressors running several shifts. One pack covers a full change even on the largest ABAC piston machines.

The basic genuine oil for ABAC SPINN screw machines in the smallest canister. For compressor rooms that are neither hot nor damp nor dusty.

A twenty-litre canister of the basic Rotair oil. The usual choice for one workshop with one screw machine and an annual change.

A two-metre 3/4" rubber hose with one end bent at 90° for connecting a compressor, air receiver and dryer. Working pressure 20 bar, two adaptors supplied.

A replacement oil sight glass for a compressor with a G 3/8" pipe thread. Outer diameter 22 mm, window 11 mm, tightened with a 19 mm spanner. Transparent PA-T technopolymer...

A monitoring module with a clamp ammeter that closes around one phase of the electric motor and tracks the running hours. It works on any brand of machine with a motor rated 2...