Compressors for all applications - hobby and industrial, Page 11

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Separate compressor units A49B with an input of 4 kW. Designed for professional use. Oil-lubricated design, single-stage compressor with two pistons. Supplied with impeller for...

Altair Ultra ALTU-1 synthetic oil is a high-performance lubricant designed for industrial compressors. It provides reliable wear protection, excellent high-temperature...

Highly economical screw compressor with variable speed control by frequency converter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4...

Oil-free reciprocating compressor with an output pressure of 8 bar designed for dental practices and applications requiring oil-free air. Stationary design with a motor input of...

24 l oil-lubricated compressor with the stronger L30P pump: 2.2 kW from an ordinary socket, 310 l/min, 10 bar, horizontal 24 l tank, 29 kg on wheels. Regulator, two gauges, DN...

E.95-10 K in Komfort version (noise-reducing steel enclosure), without air receiver · 11 kW · pressure 10 bar · capacity 1.55 m³/min. E.95 variant with a...

Innovative and economical small screw compressor SCR-11/10PM2 for saving up to 50% of electricity. Maximum output 1 500 l/min at 10 bar. Continuous speed control by frequency...

E.110 V in Standard version, with a 500 l air receiver (horizontal) · 11 kW · pressure 10 bar · capacity 1.6 m³/min. Higher capacity variant of the E.95...

E.95 KVS in Comfort version (noise-reducing steel housing), with a 500 l air receiver and integrated dryer · 11 kW · pressure 9 bar · capacity 1.6 m³/min....

E.95 KV in Comfort version (soundproof steel housing), with a 500 l air receiver (horizontal) · 11 kW · pressure 9 bar · capacity 1.6 m³/min. Medium...

E.110 in Standard version, without receiver (on legs) · 11 kW · pressure 10 bar · capacity 1.6 m³/min. Higher capacity variant of the E.95 designed for a...

The most powerful machine in the range that fits under a low ceiling — the enclosure is 1,690 mm tall. 21,000 l/min at ten bar, regulation from 6,300.

The smallest pressure penalty in the whole range: eight bar costs only 500 l/min against seven. 24,000 l/min, DN 80 outlet, weight 2,900 kg.

The backbone of a large compressor room — 28,000 l/min at eight bar holds the base demand while smaller machines come in at the peaks. The controller sequences up to sixteen.

The most powerful machine in the range at ten bar — 27,000 l/min. It never drops below 7,600 l/min, so it wants steady demand or a substantial receiver.

The highest delivery the range will give at normal industrial pressure: 31,000 l/min. Same frame as the 132 kW, only 100 kg heavier.

The lowest enclosure of the large machines — 1,690 mm, 460 mm less than the 132 kW. Into a low compressor room it often fits as the only one. 24,500 l/min.

The first machine in the range to pass thirty cubic metres a minute: 30,000 l/min. It weighs 3,050 kg, stands 2,150 mm tall and needs 25,000 m³/h of ventilation.

The top of the EPM2 range — 33,500 l/min, over thirty-three cubic metres of air a minute from a single enclosure. It needs 30,000 m³/h, twice what the 55 kW asks.

Set of fittings for complete fitting of pressure vessel and air tank with volume 100 L in galvanized finish. The set includes the following products including all settings and...

E.80VS-VARIO in Standard version, with a 270 l air receiver and integrated dryer · 7.5 kW · pressure 9 bar · capacity 0.56 – 1.5 m³/min. Vario variant E.65...

Pressure vessel "air tank" in upright design with 100 l capacity base designed for vacuum accumulation with vacuum up to -1 bar. No fittings or safety and drain valves are...

The most expensive pressure tax in the range: ten bar costs 23 % of the air here. It gives 23,000 l/min, but at seven bar that would be 7,000 l/min more.

A compressor for a room where people work and talk: the whole machine, receiver included, sits under sheet steel. The A29 pump is enough for a tyre inflator, a blow gun, a...

The most powerful machine that still fits the smaller of the large frames. 19,000 l/min at eight bar, 2,050 kg — above it come 850 kg and a new frame.

E.170 KV in Comfort version (noise-reducing steel enclosure), with 500 l receiver (horizontal) · 18.5 kW · pressure 13 bar · capacity 2.9 m³/min. 18.5 kW...