Stationary piston and screw compressors
Stationary compressors are above all high-output machines with a heavy pump (often of quality cast iron) and a large tank – simply machines that, given their weight, have to stand firmly in place. Stationary machines can be piston or screw, and if we may advise, look at the article How to choose a compressor. You will easily find out whether a big, powerful machine is the right choice for your operation – a car service, tyre service or larger workshop, for instance. With these compressor types we also recommend air treatment such as filters and dryers.
-
Black Wind piston compressors
-
ATMOS piston compressors
-
Walter reciprocating compressors
-
Piston compressors ABAC
-
Piston compressors ABAC
-
Expert Zero compressors
-
ABAC reciprocating compressors
-
Quiet compressors Super Silent OS
-
INDUSTRIAL TECH compressors
-
CLR reciprocating compressors
-
Combustion compressors
-
Screw compressors
-
Pressure vessels
-
Compressor accessories
Product sorting
List of products
The three-cylinder class with the largest reserve, for operations that draw air in heavy bursts: sandblasting smaller parts, filling, blowing down a line. The 740 l/min air...
The same unit and tank as the horizontal WK650, just standing upright: a footprint of 65 × 70 cm instead of 165 cm of length. Its 550 l/min air delivery covers painting plus a...
The smallest pump in the A series. Suits smaller workshops where the compressor runs intermittently — blowing down, inflating and light air tools.
The smallest machine in the top equipment level. To the 4-in-1 package it adds a micro-filter, an activated-carbon filter, zero-loss drains and a separator — the air exceeds...
The entry screw compressor of the range, without a receiver. 320 l/min at ten bar, 180 kg and a footprint of just 0.39 m² — for a workshop that already has a receiver.
A mid-range single-stage pump for a workshop in regular use — spraying, impact wrenches, longer draws.
The highest output with the top equipment level in the shorter package. Two thousand litres a minute, air above class 1-4-1, and only 1,517 mm long.
The strongest bare machine in the range. Two thousand litres a minute at peak, yet the same cabinet as the 11 kW — five kilowatts more without asking for a centimetre of extra...
The highest-output single-stage pump in the range. For a workshop in daily use where one tool follows another.
An 8-in-1 package with a 500 litre vessel. The cleanest air plus a large reserve — for plants that draw in bursts and cannot have oil in the air.
The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...
Compressor, dryer and 200 l receiver on one frame in 0.82 m². The entry 3-in-1 package delivering 320 l/min, with no assembly certification needed.
The 22 kW at eight bar gives 4,000 l/min. The usual choice where compressed air drives several machines at once.
Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by inverter, direct 1:1 lossless...
The middle 4-in-1 package with a 270 litre receiver. A range of 800–1,500 l/min covers a plant with several draw-off points, and the air is class 2-4-2.
A 4-in-1 package with a 500 litre vessel. The same compressor as the 270 version but with nearly twice the air reserve — for plants with bursty demand.
The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.
The strongest 4-in-1 package with a 500 litre receiver. Compressor, vessel, refrigeration dryer and pre-filter on one frame — class 2-4-2 air without assembling components piece...
The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).
The middle 8-in-1 package. To the 270 l receiver, dryer and pre-filter it adds a micro-filter, an activated-carbon filter and a condensate separator — the air exceeds class 1-4-1.
The top of the range. Highest output, largest vessel and the fullest equipment — two thousand litres a minute, 500 l of reserve and air that exceeds class 1-4-1.