Three-phase 400 V air compressors, Page 12

ST 75 Vario+ · 75 kW · delivery 13.4 / 13.3 / 12.5 / 9.7 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-14-G-R IE3 motor — high efficiency,...

A standalone screw unit for an existing receiver. It delivers 498 l/min at 10 bar and, thanks to the variable speed drive, runs only as fast as you actually draw. Noise 60...

Compressor and a hundred-litre receiver in one unit — the smallest package in the CROSS range. 498 l/min at 10 bar; the variable speed drive holds pressure steady, so a smaller...

The most popular package in the range: a rotary screw compressor with a two-hundred-litre receiver. 498 l/min at 10 bar feeds two or three air tools at once. The variable speed...

The stronger of the two CROSS versions, without a receiver. It delivers 848 l/min at 10 bar, seventy percent more than the four-kilowatt model — for several tools at once or...

Highly economical screw compressor with variable speed control by inverter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4 permanent...

The most powerful machine in the range without a receiver — 696 l/min, twice the 3 kW. Still 180 kg and a 650 × 600 × 860 mm enclosure.

Highly economical screw compressor with variable speed control by inverter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4 permanent...

The last machine in the range with a DN 50 outlet — above it the pipework goes to DN 65. 13,000 l/min at eight bar, regulation from 3,600.

The same machine on a two-hundred-litre vessel: 272 l/min at 10 bar, noise 59 dB(A). The bigger air reserve covers a full day of demand without the compressor cutting in...

A standalone 15 kW screw compressor delivering 2,215 l/min at 10 bar. Of the three it makes the most air per kilowatt. The quietest (67 dB) and the lightest (313 kg), though its...

A complete compressed-air station: a 15 kW compressor delivering 2,215 l/min, a 500-litre receiver and a refrigerant dryer on one frame. Connect power and pipework — nothing is...

A complete compressed-air station: an 18.5 kW compressor delivering 2,590 l/min, a 500-litre receiver and a refrigerant dryer on one frame. The middle of the three complete...

A standalone 22 kW screw compressor delivering 3,090 l/min at 10 bar. The strongest machine in the range, on a 1,130 × 780 mm footprint — the same as the 15 kW.

The largest complete compressed-air station in the range: a 22 kW compressor delivering 3,090 l/min, a 500-litre receiver and a refrigerant dryer on one frame. The most powerful...

A standalone screw unit without a receiver. It delivers 996 l/min at 10 bar from a footprint of 850 × 720 mm, so it fits even where the receiver already stands. V-belt drive,...

The smallest in the range with a variable speed drive. It regulates steplessly from 131 to 293 l/min, so it makes only as much air as you are drawing. 200 l receiver,...

The 3 kW regulates from 139 to 360 l/min and still stays at 57 dB(A) like the smallest model. 67 l/min more at the top for the same noise. 200 l receiver and refrigerant dryer.

The 4 kW regulates from 270 to 503 l/min at 58 dB(A). It feeds two or three pneumatic tools at once and drops back when demand falls instead of idling. 200 l receiver with dryer.

The strongest in the range. It regulates from 337 to 757 l/min, the widest range of all four models. It feeds several workstations at once. 200 l receiver, refrigerant dryer, 61...

A machine for smaller operations with fluctuating consumption, oil is separated in it by an immersion separator. The housing with a footprint of 1,090 × 730 mm weighs 243 kg,...

A machine for smaller production with fluctuating demand, which can optionally be fitted with a tank and dryer. It weighs 243 kg, the connection is G ¾″ and the noise level is...

A machine with an inverter for medium-sized operations where air consumption varies. It weighs 378 kg, noise level is 64 dB(A). The G 1″ connection and cabinet with a floor plan...

A large standalone machine with an inverter for production with variable air consumption. It weighs 4,000 kg, the connection is DN 65 and the noise level is 77 dB(A). The air...

The smallest two-stage WALTER for operation that runs full shifts and doesn't want to waste electricity. The housing with a footprint of 1.5 × 1.04 m weighs 738 kg and the...

Single-stage machine with an inverter for operation that will not run full shifts. It is 320 kg lighter than the two-stage SF 22 DSP. The connection is G 1″, noise level 64 dB(A).

Basic model from a range of three machines in a common housing for medium-sized operations with fluctuating consumption. It weighs 518 kg, the connection is G 1½″ and the noise...

The smallest two-stage WALTER, capable of handling up to 13 bar. It shares a housing with the SF 30 DSP and weighs 841 kg. Connection G 1½″, noise level 65 dB(A).

Middle machine out of three in a common enclosure, suitable for medium-duty operation with fluctuating consumption. It weighs 591 kg, the connection is G 1½″, noise level is 66...

The strongest machine of the three in a common housing, designed for medium operation with fluctuating demand. It weighs 690 kg, the connection is G 1½″, noise level 66 dB(A).

The more powerful of the pair of two-stage machines in a shared housing with the SF 45 DSP, for operation with several larger consumers at the same time. It weighs 1,663 kg,...

A two-stage WALTER with its own housing, designed for larger operations with continuous running. It weighs 1,861 kg and the connection is G 2″. Noise level 68 dB(A).

Two-stage WALTER for industrial operation with continuous draw-off, the first model in a large housing with a DN 65 connection. It weighs 3,300 kg. Noise level 70 dB(A).

The most powerful assembly in the SFTG KSP range for operation with higher air consumption. Housing 1,970 × 760 × 1,750 mm, weight 432 kg, connection G ¾″, noise level 62 dB(A).

A medium tank size in the SFTG KSP range, an inverter compressor for a workshop with fluctuating air consumption. The 1,683 × 739 × 1,629 mm assembly weighs 326 kg, the...

A compressor with an inverter for smaller operations that require higher pressure and have limited space. The housing 1,280 × 650 × 1,630 mm weighs 280 kg, the connection is G...

An assembly with a large air supply for operation with multiple outlet points and tools requiring higher pressure. Housing 1,970 × 720 × 1,700 mm, weight 383 kg, connection G...

Direct-drive model for operation that has outgrown the smallest housing in the range but does not yet require the medium size. The 1,300 × 880 mm housing is shared with the SK...

Mid-size housing model for three sizes, designed for constant air consumption without speed control. G 1½″ connection, weight 591 kg and noise level 66 dB(A).

The most powerful model with a housing of 1,500 × 1,030 mm for operation with continuous air consumption. It weighs 690 kg, G 1½″ connection, noise level 66 dB(A).