Single-stage piston and screw compressors, Page 4

The most powerful vertical WALTER: a three-cylinder unit delivering 740 l/min on a footprint of 65 × 70 cm. For a workshop with two workstations that has no room for a two-metre...

The largest tank a two-kilowatt pump gets in this range. Fifty litres, 44 kg, still on wheels and with a handle.

A two-cylinder single-stage ATMOS Perfect 2,2/90 S compressor with a cast-iron LB 30 pump unit, on a vertical 90 l air receiver. It delivers 310 l/min of compressed air at 10...

A three-cylinder single-stage ATMOS Perfect 3/90 S compressor with a cast-iron LB 40-3 pump unit, on a vertical 90 l air receiver. It delivers 408 l/min of compressed air at 10...

A three-cylinder single-stage ATMOS Perfect 5,5/2x90 compressor with a cast-iron LB 75 pump unit, on two 90 l air receivers. It delivers 750 l/min of compressed air at 10 bar...

A high-pressure version for processes where 10 bar is not enough: pressure testing, pressing, machines with a specified pressure. The unit runs at just 817 rpm and delivers 500...

The highest pressure of the twin-cylinder platform, for test facilities and processes with a specified minimum above 13 bar. The unit runs at 776 rpm, the slowest in its class,...

The only vertical WALTER for a standard socket: the upright tank stands against a wall and occupies a footprint of 63 × 54 cm. Its 340 l/min air delivery is enough for blowing,...

A vertical version for a workshop short of floor space: the upright tank takes up a footprint of 63 × 54 cm and can stand against a wall. The cast-iron twin delivers 340 l/min...

Three-cylinder performance on a footprint of 63 × 56 cm: a vertical version for a workshop that needs more air than the smallest class but has nowhere to put a horizontal...

The largest tank the range offers for a standard socket: for a workshop without three-phase power where air is drawn in bursts, but in large amounts. The 340 l/min air delivery...

A small unit with a large tank for a workshop with intermittent but heavy air demand: the reserve holds the pressure for longer than the 340 l/min air delivery alone could keep...

A machine for a single tyre-service bay: impact wrench and tyre changer with no waiting for the pressure to build back up. Three cylinders in a W and a large tank keep the...

For two people working at the same time and continuously: a grinder plus a spray gun, or two tyre-service bays. The three-cylinder unit at 902 rpm delivers 740 l/min, and the...

A cast-iron unit for a workshop that already has a working pressure tank and needs a new air supply. The twin-cylinder unit runs at 1,276 rpm and delivers 340 l/min for blowing,...

A unit on a base frame for a workshop without a three-phase supply: it replaces a worn-out compressor on a tank that is still in good working order. The cast-iron twin delivers...

A three-cylinder unit on a base frame for a working tank with a valid inspection whose motor or compressor pump has reached the end of its life. The W layout spreads the...

The unit from the most requested class of the range, without a tank: for a compressor room or your own assembly on a working tank. The large-bore twin runs at 993 rpm and...

A three-cylinder unit for two workstations running at the same time, without a tank: for a compressor room or an existing air receiver with a valid inspection. The W layout at...

Compact oil-immersed piston compressor with small footprint. The foldable high handle included with the machine ensures easy handling along with the strong base and larger...

Compact oil-immersed piston compressor with small footprint. The foldable high handle included with the machine ensures easy handling along with the strong base and larger...