Compressors for all applications - hobby and industrial, Page 8

Pressure vessel without supports with a volume of 24 l in a horizontal design. The aerator is designed for compressed air medium and is made without feet. The maximum operating...

The biggest reserve in the quiet range: horizontal 50 l tank on wheels, 32 kg. Oil-free twin-piston pump 1.5 kW at 1,420 rpm, 230 l/min, 9 bar, 85 dB Lwa and 65 dB at 4 m;...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

The most sensible 3-in-1 package: 510 l/min with a dryer and a 200 l receiver. The best output-to-input ratio in the range, weight 279 kg.

The most powerful 3-in-1 package without filtration — 696 l/min, dryer and 200 l receiver. Twice the entry 3 kW on the same footprint.

The middle 4-in-1 package with a 270 litre receiver. A range of 800–1,500 l/min covers a plant with several draw-off points, and the air is class 2-4-2.

A 4-in-1 package with a 500 litre vessel. The same compressor as the 270 version but with nearly twice the air reserve — for plants with bursty demand.

The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.

The middle 8-in-1 package. To the 270 l receiver, dryer and pre-filter it adds a micro-filter, an activated-carbon filter and a condensate separator — the air exceeds class 1-4-1.

The highest output with the top equipment level in the shorter package. Two thousand litres a minute, air above class 1-4-1, and only 1,517 mm long.

Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...

The entry screw compressor of the range, without a receiver. 320 l/min at ten bar, 180 kg and a footprint of just 0.39 m² — for a workshop that already has a receiver.

The most powerful machine in the range without a receiver — 696 l/min, twice the 3 kW. Still 180 kg and a 650 × 600 × 860 mm enclosure.

The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...

The choice for a workshop that has outgrown the entry model. The three-kilowatt motor delivers 366 l/min at 10 bar — a quarter more air than the SPM-2,2, yet the noise stays at...

The most powerful machine in the SPINN Mini range: 780 l/min at 10 bar, which is 2.65 times the output of the entry model. It handles a spray gun and several workstations at...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

An eleven-kilowatt set with a 500-litre receiver and a refrigerant dryer. 1,416 l/min at 10 bar, 69 dB(A). Dry air for pipework serving several people at once.

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The best-equipped set in the range. A fifteen-kilowatt compressor, a 500-litre receiver and a refrigerant dryer in one frame. 1,680 l/min at 10 bar, 71 dB(A), weight 300 kg.

The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry...

Compressor, 500-litre receiver and refrigerant dryer in one unit. 996 l/min at 10 bar, 7.5 kW, 65 dB(A). Dry air and a reserve for peak demand without assembling a set.

The 4 kW regulates from 270 to 503 l/min at 58 dB(A). It feeds two or three pneumatic tools at once and drops back when demand falls instead of idling. 200 l receiver with dryer.

The strongest in the range. It regulates from 337 to 757 l/min, the widest range of all four models. It feeds several workstations at once. 200 l receiver, refrigerant dryer, 61...

The smallest machine at the top equipment level. It turns down to 130 l/min and up to 320, yet does everything the larger assemblies do — two-stage filtration, automatic...

The middle machine at the top equipment level. A 200–510 l/min range covers a workshop with several stations, and adds two-stage filtration, automatic condensate drainage and a...

The top equipment level and the largest machine. To the 3-in-1 assembly it adds two-stage filtration and automatic condensate handling — class 1-4-1 air to ISO 8573-1 and a...

The SCR-2/10XA is an oil-free scroll compressor with a free air delivery of 200 l/min (12 Nm³/h) at 10 bar and a total power input of 2.2 kW. The air is compressed by a single...

The SCR-4/10XA is an oil-free scroll compressor with a free air delivery of 350 l/min (21 Nm³/h) at 10 bar and a total power input of 3.7 kW. The air is compressed by a single...

The SCR-7/10XA is an oil-free scroll compressor with a free air delivery of 700 l/min (42 Nm³/h) at 10 bar and a total power input of 7.4 kW. The air is compressed by 2 scroll...

Service kit for maintenance of ATMOS 2 years machine with marking N770305. The kit includes all the necessary parts for annual servicing of the machine. There is also a QR code...

Service kit for maintenance of the ATMOS 2 years with the designation N770552. The kit includes all the necessary parts for annual servicing of the machine. There is also a QR...

Service kit for maintenance of the ATMOS 3 years with the designation N770553. The kit includes all the necessary parts for annual servicing of the machine. There is also a QR...