Compressors for all applications - hobby and industrial, Page 8

Original high quality lubricants for MARK screw compressors. Additives to ensure special properties and for perfect lubrication of the screw compressor. Rotair Plus Oils: heavy...

Walter piston compressor lubricating oil 5 L. Special viscosity specifically for GK series compressors in piston design. WALTER brand oil manufacturer with safety data sheet...

The lightest oil-lubricated compressor in the ABAC L25P/L30P range: 1.8 kW L25P pump from an ordinary socket, 270 l/min, 10 bar, horizontal 24 l tank, 28 kg on wheels....

50 l oil-lubricated compressor for the garage and smaller workshop: 1.8 kW L25P pump from an ordinary socket, 270 l/min, 10 bar, horizontal 50 l tank, 36 kg on wheels....

The highest-output direct drive in the range: V-twin, 2.2 kW, 356 l/min, 50 l tank, 40 kg. For a spray gun, a grinder and longer work from a standard socket.

Pressure switch for controlling the piston compressor. Voltage 400/50 V/Hz and current 6.3 A. Possibility to adjust the lower and upper pressure limits. Easy to operate by means...

Pressure vessel with a volume of 10 l in a recumbent design on a base. The aerator is designed for the medium compressed air. The maximum operating pressure is 11 bar. The...

Pressure vessel with a capacity of 24 l in upright or vertical design. The aerator is designed for the medium compressed air and is built on a base which is part of the whole...

Pressure vessel without supports with a volume of 15 l in a horizontal design. The aerator is designed for compressed air medium and is made without feet. The maximum operating...

Pressure vessel without supports with a volume of 24 l in a horizontal design. The aerator is designed for compressed air medium and is made without feet. The maximum operating...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 2 000 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

The most sensible 3-in-1 package: 510 l/min with a dryer and a 200 l receiver. The best output-to-input ratio in the range, weight 279 kg.

The strongest 4-in-1 package with a 500 litre receiver. Compressor, vessel, refrigeration dryer and pre-filter on one frame — class 2-4-2 air without assembling components piece...

The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).

Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...

The best output-to-input ratio in the range: 8 % more power than the 3 kW but 59 % more air. 510 l/min, same enclosure and weight.

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The 4 kW regulates from 270 to 503 l/min at 58 dB(A). It feeds two or three pneumatic tools at once and drops back when demand falls instead of idling. 200 l receiver with dryer.

The strongest in the range. It regulates from 337 to 757 l/min, the widest range of all four models. It feeds several workstations at once. 200 l receiver, refrigerant dryer, 61...

The smallest machine at the top equipment level. It turns down to 130 l/min and up to 320, yet does everything the larger assemblies do — two-stage filtration, automatic...

The middle machine at the top equipment level. A 200–510 l/min range covers a workshop with several stations, and adds two-stage filtration, automatic condensate drainage and a...

The SCR-2/10XA is an oil-free scroll compressor with a free air delivery of 200 l/min (12 Nm³/h) at 10 bar and a total power input of 2.2 kW. The air is compressed by a single...

The SCR-4/10XA is an oil-free scroll compressor with a free air delivery of 350 l/min (21 Nm³/h) at 10 bar and a total power input of 3.7 kW. The air is compressed by a single...

The SCR-7/10XA is an oil-free scroll compressor with a free air delivery of 700 l/min (42 Nm³/h) at 10 bar and a total power input of 7.4 kW. The air is compressed by 2 scroll...

Service kit for maintenance of ATMOS machine after 2 years with marking N770227. The kit includes all the necessary parts for annual servicing of the machine. There is also a QR...