Compressors without air dryer, Page 3
-
Black Wind piston compressors
-
ATMOS piston compressors
-
Walter reciprocating compressors
-
Piston compressors ABAC
-
Piston compressors ABAC
-
Expert Zero compressors
-
ABAC reciprocating compressors
-
Quiet compressors Super Silent OS
-
INDUSTRIAL TECH compressors
-
CLR reciprocating compressors
-
Combustion compressors
-
Screw compressors
-
Pressure vessels
-
Compressor accessories
.png)
Product sorting
List of products
A mid-range single-stage pump for a workshop in regular use — spraying, impact wrenches, longer draws.
The same unit and tank as the horizontal WK650, just standing upright: a footprint of 65 × 70 cm instead of 165 cm of length. Its 550 l/min air delivery covers painting plus a...
The most common choice for workshops without a three-phase supply. Its 340 l/min air delivery covers a blow gun, a ratchet and a stapler, and the tank holds pressure for short...
A well-balanced entry-level combination for a single workstation in a smaller workshop: a cast-iron twin with twice the air reserve of the smallest machine, so the motor...
A three-cylinder unit on a compact tank for a workshop where several tools take turns and none of them runs for long. Its 440 l/min air delivery handles an impact wrench, a blow...
A three-cylinder unit with a large tank for a workshop where two people work in turns. The 440 l/min air delivery keeps the reserve topped up, so the motor switches on less...
The sweet spot of the range for car workshops, paint shops and metalworking: one person works continuously while a second occasionally picks up an impact wrench. The speed drops...
The three-cylinder class with the largest reserve, for operations that draw air in heavy bursts: sandblasting smaller parts, filling, blowing down a line. The 740 l/min air...
The most powerful single-stage machine in the range: A39B with 3 kW on 400 V, 486 l/min at 1,300 rpm, 10 bar, 90 l tank on castors, 94 kg. Regulator, two gauges, DN 7.2 quick...
Two-stage A49B pump with 2.2 kW on 400 V: 444 l/min at 1,050 rpm, 11 bar, 150 l tank on castors, 114 kg. Intercooler, aftercooler, regulator, DN 7.2 quick coupling; 91 dB Lwa /...
The lightest machine in the range, 55 kg: A29B pump with 1.5 kW on 230 V, 178 l/min at 750 rpm, 10 bar, 50 l tank on castors. Aftercooler, regulator, two gauges, DN 7.2 quick...
A compressor for work where no cable reaches — on building sites, in orchards, on farmland or for repairs out on site. It handles staplers, blow guns, tyre inflation and short...
Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by inverter, direct 1:1 lossless...
The middle bare machine of the range. It controls from 800 to 1,500 l/min and takes a footprint of 900 × 820 mm. For plants that handle the receiver and air treatment centrally.
The strongest bare machine in the range. Two thousand litres a minute at peak, yet the same cabinet as the 11 kW — five kilowatts more without asking for a centimetre of extra...
The entry screw compressor of the range, without a receiver. 320 l/min at ten bar, 180 kg and a footprint of just 0.39 m² — for a workshop that already has a receiver.
The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...
A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...
The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).
The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.
The SCR-2/10XA is an oil-free scroll compressor with a free air delivery of 200 l/min (12 Nm³/h) at 10 bar and a total power input of 2.2 kW. The air is compressed by a single...
The SCR-4/10XA is an oil-free scroll compressor with a free air delivery of 350 l/min (21 Nm³/h) at 10 bar and a total power input of 3.7 kW. The air is compressed by a single...
The SCR-7/10XA is an oil-free scroll compressor with a free air delivery of 700 l/min (42 Nm³/h) at 10 bar and a total power input of 7.4 kW. The air is compressed by 2 scroll...
ST 75 · 75 kW · delivery 12.7 / 12 / 10.8 / 9.3 m³/min · pressure 7.5 / 8.5 / 10 / 13 bar. Screw block SCA-14-G-R IE3 motor — high efficiency, multi-V...
The stronger sibling of the A29 on the same pulley. Same installation envelope, higher output — the one to pick when the existing block has stopped keeping up and the motor and...
