Three-phase 400 V air compressors, Page 2

Compressor, dryer and 200 l receiver on one frame in 0.82 m². The entry 3-in-1 package delivering 320 l/min, with no assembly certification needed.

The same unit and tank as the horizontal WK650, just standing upright: a footprint of 65 × 70 cm instead of 165 cm of length. Its 550 l/min air delivery covers painting plus a...

A well-balanced entry-level combination for a single workstation in a smaller workshop: a cast-iron twin with twice the air reserve of the smallest machine, so the motor...

A three-cylinder unit on a compact tank for a workshop where several tools take turns and none of them runs for long. Its 440 l/min air delivery handles an impact wrench, a blow...

A three-cylinder unit with a large tank for a workshop where two people work in turns. The 440 l/min air delivery keeps the reserve topped up, so the motor switches on less...

The sweet spot of the range for car workshops, paint shops and metalworking: one person works continuously while a second occasionally picks up an impact wrench. The speed drops...

The three-cylinder class with the largest reserve, for operations that draw air in heavy bursts: sandblasting smaller parts, filling, blowing down a line. The 740 l/min air...

The most powerful single-stage machine in the range: A39B with 3 kW on 400 V, 486 l/min at 1,300 rpm, 10 bar, 90 l tank on castors, 94 kg. Regulator, two gauges, DN 7.2 quick...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by inverter, direct 1:1 lossless...

The middle 4-in-1 package with a 270 litre receiver. A range of 800–1,500 l/min covers a plant with several draw-off points, and the air is class 2-4-2.

A 4-in-1 package with a 500 litre vessel. The same compressor as the 270 version but with nearly twice the air reserve — for plants with bursty demand.

The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.

The strongest 4-in-1 package with a 500 litre receiver. Compressor, vessel, refrigeration dryer and pre-filter on one frame — class 2-4-2 air without assembling components piece...

The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).

The middle 8-in-1 package. To the 270 l receiver, dryer and pre-filter it adds a micro-filter, an activated-carbon filter and a condensate separator — the air exceeds class 1-4-1.

An 8-in-1 package with a 500 litre vessel. The cleanest air plus a large reserve — for plants that draw in bursts and cannot have oil in the air.

The top of the range. Highest output, largest vessel and the fullest equipment — two thousand litres a minute, 500 l of reserve and air that exceeds class 1-4-1.

Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...

The middle bare machine of the range. It controls from 800 to 1,500 l/min and takes a footprint of 900 × 820 mm. For plants that handle the receiver and air treatment centrally.

The strongest bare machine in the range. Two thousand litres a minute at peak, yet the same cabinet as the 11 kW — five kilowatts more without asking for a centimetre of extra...

The entry screw compressor of the range, without a receiver. 320 l/min at ten bar, 180 kg and a footprint of just 0.39 m² — for a workshop that already has a receiver.

The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...

The choice for a workshop that has outgrown the entry model. The three-kilowatt motor delivers 366 l/min at 10 bar — a quarter more air than the SPM-2,2, yet the noise stays at...

The first model in the range that can handle tools drawing air continuously — grinders, sandblasting guns, longer blasting jobs. The four-kilowatt motor delivers 516 l/min at 10...

The most powerful machine in the SPINN Mini range: 780 l/min at 10 bar, which is 2.65 times the output of the entry model. It handles a spray gun and several workstations at...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).