Compressors for all applications - hobby and industrial, Page 8

Original high quality lubricants for MARK screw compressors. Additives to ensure special properties and for perfect lubrication of the screw compressor. Rotair Plus Oils: heavy...

Original high quality lubricants for MARK screw compressors. Additives to ensure special properties and for perfect lubrication of the screw compressor. Rotair oils: mineral...

Original high quality lubricants for MARK screw compressors. Additives to ensure special properties and for perfect lubrication of the screw compressor. Rotair oils: mineral...

Walter piston compressor lubricating oil 5 L. Special viscosity specifically for GK series compressors in piston design. WALTER brand oil manufacturer with safety data sheet...

50 l oil-lubricated compressor for the garage and smaller workshop: 1.8 kW L25P pump from an ordinary socket, 270 l/min, 10 bar, horizontal 50 l tank, 36 kg on wheels....

50 l oil-lubricated compressor with the L30P pump: 2.2 kW from an ordinary socket, 310 l/min, 10 bar, horizontal 50 l tank, 37 kg on wheels. Regulator, two gauges, DN 7.2 quick...

A quiet compressor as a sack truck: 20 l tank under the pump in a frame on two wheels, 33 kg. Oil-free twin-piston pump 1.5 kW at 1,420 rpm, 230 l/min, 9 bar, 85 dB Lwa and 65...

Strongest six in the range: oil-free twin-piston pump 1.5 kW at 1,420 rpm, 230 l/min, 8 bar, 85 dB Lwa and 65 dB at 4 m. Six litres in a frame with a handle, 19 kg — for a...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 2 000 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

The most sensible 3-in-1 package: 510 l/min with a dryer and a 200 l receiver. The best output-to-input ratio in the range, weight 279 kg.

The middle 4-in-1 package with a 270 litre receiver. A range of 800–1,500 l/min covers a plant with several draw-off points, and the air is class 2-4-2.

A 4-in-1 package with a 500 litre vessel. The same compressor as the 270 version but with nearly twice the air reserve — for plants with bursty demand.

The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.

The strongest 4-in-1 package with a 500 litre receiver. Compressor, vessel, refrigeration dryer and pre-filter on one frame — class 2-4-2 air without assembling components piece...

The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).

Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...

The entry screw compressor of the range, without a receiver. 320 l/min at ten bar, 180 kg and a footprint of just 0.39 m² — for a workshop that already has a receiver.

The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...

The choice for a workshop that has outgrown the entry model. The three-kilowatt motor delivers 366 l/min at 10 bar — a quarter more air than the SPM-2,2, yet the noise stays at...

The first model in the range that can handle tools drawing air continuously — grinders, sandblasting guns, longer blasting jobs. The four-kilowatt motor delivers 516 l/min at 10...

The most powerful machine in the SPINN Mini range: 780 l/min at 10 bar, which is 2.65 times the output of the entry model. It handles a spray gun and several workstations at...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

An eleven-kilowatt set with a 500-litre receiver and a refrigerant dryer. 1,416 l/min at 10 bar, 69 dB(A). Dry air for pipework serving several people at once.

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The best-equipped set in the range. A fifteen-kilowatt compressor, a 500-litre receiver and a refrigerant dryer in one frame. 1,680 l/min at 10 bar, 71 dB(A), weight 300 kg.

The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry...

Compressor, 500-litre receiver and refrigerant dryer in one unit. 996 l/min at 10 bar, 7.5 kW, 65 dB(A). Dry air and a reserve for peak demand without assembling a set.

The 4 kW regulates from 270 to 503 l/min at 58 dB(A). It feeds two or three pneumatic tools at once and drops back when demand falls instead of idling. 200 l receiver with dryer.