Compressors for all applications - hobby and industrial ABAC kompresory, Page 9

A compressor for a room where people work and talk: the whole machine, receiver included, sits under sheet steel. The stronger A29B pump also handles a larger impact wrench or a...

A compressor for a room where people work and talk: the whole machine, receiver included, sits under sheet steel. The stronger A29B pump also handles a larger impact wrench or a...

The only machine in the range on an ordinary single-phase supply, and the calmest of the fifteen. The lowest assembly in the category: an L1 cabinet on a 270 l receiver, 248 kg....

The calmest machine in the category on a three-phase supply. A single-stage pump in the lowest and narrowest assembly of the whole range: an L1 cabinet on a 270 l receiver, 248 kg.

A three-kilowatt single-stage machine for a workshop that has outgrown the smallest one but does not need eleven bar. The lowest assembly in the category: an L1 cabinet on a 270...

The way into the cabinet range and the only single-stage pump in the category. The L1 cabinet weighs 170 kg and takes up roughly half a square metre. No vessel of its own — for...

The first two-stage machine in the category: eleven bar and cooler compression, yet still in the lowest assembly. An L1 cabinet on a 270 l receiver, 248 kg.

The same three-kilowatt pump as in the low assembly, but in the taller L2 cabinet with the controls on a separate column. The lightest machine in the category — 238 kg on a 270...

A two-stage machine in the smallest cabinet: 11 bar and thirty per cent more air than its single-stage neighbour. The L1 cabinet weighs 170 kg. No vessel of its own, for...

A three-kilowatt pump in the large L2 cabinet with a control panel and LED fault indication. The output is the same as the L1 version; what you gain is room inside and better...

The most air that fits into the low assembly on a 270 l receiver. A four-kilowatt two-stage pump in an L1 cabinet, 248 kg.

The most air of all the narrow assemblies — a five-hundred-litre receiver at a width of just 580 mm. A four-kilowatt two-stage pump, L1 cabinet, 274 kg.

The most air that fits into the small cabinet: 598 l/min from a four-kilowatt pump, an L1 cabinet weighing 170 kg. No vessel of its own, for pipework or a separate receiver.

The calmest four-kilowatt machine on a 270 l receiver. The B59 pump runs more slowly than an equally strong A49B, which is why it is two decibels quieter. L2 cabinet, 252 kg.

The calmest four-kilowatt machine on a 270 l receiver, with a soft motor start on top. For workshops with a weaker supply or with frequent cut-ins. L2 cabinet, 252 kg.

A large air reserve on a narrow footprint: a five-hundred-litre receiver and only 580 mm of width. The slowed B59 pump holds the machine at 87 dB Lwa. L1 cabinet, 274 kg.

The calmest machine of the large assembly: 87 dB Lwa with a five-hundred-litre receiver and a tall L2 cabinet with the controls on a column. A slowed four-kilowatt B59 pump, 302...

The calmest machine in the category and the way into the assembly with a built-in dryer. A slowed four-kilowatt B59 pump in an L2 cabinet on a five-hundred-litre receiver, 302 kg.

The calmest machine in the category, with soft motor starting on top. For workshops with a weaker supply or where the compressor cuts in often. L2 cabinet with a dryer on a 500...

The calmest machine in the whole category — 87 dB Lwa. The B59 pump at four kilowatts turns more slowly than its rivals in the same cabinet, and that is why it is quieter. L1...

The calmest machine in the large cabinet — 87 dB Lwa and four kilowatts. Control panel with LED fault indication, weight 177 kg. No vessel of its own, for pipework or a separate...

The calmest machine in the category with a star-delta start — the motor runs up in two steps and spares the supply the current surge. L2 cabinet with LED panel, 181 kg. No...

A five-and-a-half-kilowatt machine for a workshop running several tools at once. A five-hundred-litre receiver in a tall L2 cabinet at 404 kg — a hundred kilos over the...

A five-and-a-half-kilowatt machine with a dryer for a workshop where several tools draw air at once. A sturdier build than the four-kilowatt ones — 404 kg in an L2 cabinet on a...

A five-and-a-half-kilowatt machine with a soft motor start, for workshops with a weaker supply or frequent cut-ins. Five-hundred-litre receiver, tall L2 cabinet, 404 kg.

A five-and-a-half-kilowatt machine with a dryer and soft motor starting. For shops with a weaker supply or frequent cut-ins. L2 cabinet on a five-hundred-litre receiver, 404 kg.

A 5.5 kW pump with a star-delta start in the L2 cabinet: 660 l/min, LED panel, 240 kg. Sixteen per cent more air than the four-kilowatt machines. No vessel of its own.

The strongest machine in the category — a seven-and-a-half-kilowatt pump on a five-hundred-litre receiver. For a workshop running several stations on air at once. Tall L2...

The strongest machine in the category with a built-in dryer — a seven-and-a-half-kilowatt pump on a 500 l receiver. For shops where several stations hang on dry air. L2 cabinet,...

The strongest machine in the category, with a soft motor start on top. On a seven-and-a-half-kilowatt motor star-delta is closer to a necessity than to an option. Tall L2...

The top of the category: the strongest pump, a built-in dryer and soft motor starting. On a seven-and-a-half-kilowatt motor that is closer to a necessity than an extra. L2...

The most air in the category — 1,070 l/min from a 7.5 kW pump. L2 cabinet with LED panel, 253 kg. Direct start. No vessel of its own, for pipework or a separate receiver.