Oil-lubricated air compressors, Page 3

The only machine in the range for a 230 V socket: A29B pump with 2.2 kW, 320 l/min at 1,300 rpm, 10 bar, 50 l tank on castors, 58 kg. Regulator, two gauges, DN 7.2 quick...

The lightest machine in the range, 55 kg: A29B pump with 1.5 kW on 230 V, 178 l/min at 750 rpm, 10 bar, 50 l tank on castors. Aftercooler, regulator, two gauges, DN 7.2 quick...

The ninety with the A29B pump: 1.5 kW on 230 V, 178 l/min at 750 rpm, 10 bar, 69 kg on castors. In stock; moulded belt guard, aftercooler, regulator; noise 93 dB Lwa and 73 dB...

The fifty with the A39B pump: 2.2 kW (3 hp) on 230 V, 355 l/min at 950 rpm, 10 bar, 67 kg on castors. Belt guard that guides the cooling air, aftercooler, DN 7.2 quick coupling;...

The A39B pump on the biggest tank in the range: 2.2 kW on 230 V, 355 l/min at 950 rpm, 10 bar, 90 l tank on castors, 80 kg. Reserve for longer bursts, aftercooler, regulator; 95...

Belt-driven compressor with cast-iron pump: 2.2 kW, 320 l/min, 10 bar, 50 l, aftercooler, 71 dB at 4 m. The only machine in the range for regular work, 54 kg.

The highest-output direct drive in the range: V-twin, 2.2 kW, 356 l/min, 50 l tank, 40 kg. For a spray gun, a grinder and longer work from a standard socket.

A compressor for work where no cable reaches — on building sites, in orchards, on farmland or for repairs out on site. It handles staplers, blow guns, tyre inflation and short...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 2 000 l/min at 10 bar. Continuous speed control by inverter, direct 1:1 lossless...

The middle 4-in-1 package with a 270 litre receiver. A range of 800–1,500 l/min covers a plant with several draw-off points, and the air is class 2-4-2.

The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.

The strongest 4-in-1 package with a 500 litre receiver. Compressor, vessel, refrigeration dryer and pre-filter on one frame — class 2-4-2 air without assembling components piece...

The smallest and quietest 4-in-1 package. Compressor, 270 l receiver, refrigeration dryer and pre-filter on one frame — a finished source of class 2-4-2 air at 66 dB(A).

An 8-in-1 package with a 500 litre vessel. The cleanest air plus a large reserve — for plants that draw in bursts and cannot have oil in the air.

The top of the range. Highest output, largest vessel and the fullest equipment — two thousand litres a minute, 500 l of reserve and air that exceeds class 1-4-1.

Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...

The middle bare machine of the range. It controls from 800 to 1,500 l/min and takes a footprint of 900 × 820 mm. For plants that handle the receiver and air treatment centrally.

The strongest bare machine in the range. Two thousand litres a minute at peak, yet the same cabinet as the 11 kW — five kilowatts more without asking for a centimetre of extra...

The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...

The choice for a workshop that has outgrown the entry model. The three-kilowatt motor delivers 366 l/min at 10 bar — a quarter more air than the SPM-2,2, yet the noise stays at...

The first model in the range that can handle tools drawing air continuously — grinders, sandblasting guns, longer blasting jobs. The four-kilowatt motor delivers 516 l/min at 10...

The most powerful machine in the SPINN Mini range: 780 l/min at 10 bar, which is 2.65 times the output of the entry model. It handles a spray gun and several workstations at...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

An eleven-kilowatt set with a 500-litre receiver and a refrigerant dryer. 1,416 l/min at 10 bar, 69 dB(A). Dry air for pipework serving several people at once.

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The best-equipped set in the range. A fifteen-kilowatt compressor, a 500-litre receiver and a refrigerant dryer in one frame. 1,680 l/min at 10 bar, 71 dB(A), weight 300 kg.

The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry...

Compressor, 500-litre receiver and refrigerant dryer in one unit. 996 l/min at 10 bar, 7.5 kW, 65 dB(A). Dry air and a reserve for peak demand without assembling a set.

Complete set for smaller operations with intermittent demand and dried air: compressor, tank, dryer and filters all in one unit. Housing 1,970 × 720 × 1,700 mm, weight 395 kg,...